My Chamberlain 1265 stopped working a few weeks ago. You guys gave me
advice about what could be wrong, so I opened it up and found nothing
obvious. However, when I touched the capacitor, it suddenly started working
again. It worked for a few weeks; but is dead now.

I suppose I can try touching the capacitor again, but there has to be a
better fix. I didn't move anything, so I don't think it was a loose wire.

Chamberlain say it is because something went past something else, but that
doesn't explain why touching the capacitor fixed it.

Thanks.

"toller" wrote in message
...
My Chamberlain 1265 stopped working a few weeks ago. You guys gave me
advice about what could be wrong, so I opened it up and found nothing
obvious. However, when I touched the capacitor, it suddenly started
working again. It worked for a few weeks; but is dead now.

I suppose I can try touching the capacitor again, but there has to be a
better fix. I didn't move anything, so I don't think it was a loose wire.

Chamberlain say it is because something went past something else, but that
doesn't explain why touching the capacitor fixed it.

Thanks.


You could have a cold solder joint on the capacitor. Get a magnifier and
look closely for oxidation or cracking at the joint. I used to have a
Chamberlain remote keypad on my garage door and it was *real* picky about
moisture. If it rained a few days you could count on it acting up. .....
good luck, Ross