|
All aluminum versus copper/aluminum coils for air conditioner?
I have spoken with several HVAC contractors regarding replacement of my
old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. |
All aluminum versus copper/aluminum coils for air conditioner?
On Mar 31, 8:47*am, Smarty wrote:
I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. When I was replacing mine a year ago I looked at Consumer Reports and other sources. My conclusion was there wasn't any significant difference in the trouble history among the common brands. I think Goodman had more problems some years back. Some folks still don't like them. It looked to me like you're paying a lot more for the name in a Trane versus say a Rheem. When I looked at the data, Rheem had less repair problems than the top name brands, but it wasn't enough to be statistically significant, As to the reliability of copper, two points. The system I replaced was a 27 year old Ruud. It was still running and never had a service issue other than needing to put in a hard start kit about 12 years into it's service. So copper obviously lasts. Second, if copper is the source of problems, ask the installer what they are going to use for a line set. The line sets are all copper, so you're going to have a lot more copper in the system from that than from the coils. I would suspect that Trane's decision to use all aluminum is based on something else. Look up the current price of raw copper versus aluminum. One thing that everyone should agree on is that you are far better off getting what is perceived as a lesser brand that is installed correctly than a Trane that is installed incorrectly. A simple exampe is do they flow nitrogen when doing the brazing? A half-assed installer can save and skip that. The result is you have crud form inside the lines that leads to failure down the road. Another thing to find out, are they replacing your line set or re-using the old one? IMO, for the couple hundred bucks, it's worth going with new, but again, installers can cut corners. If you do re-use them, they have to be properly flushed. Those are examples of where you can get screwed and the typical homeowner would never know. |
All aluminum versus copper/aluminum coils for air conditioner?
It's been my experience that copper is a harder metal, and much easier to
work with, in terms of soldering or brazing. I've not tried aluminum, I'd just expect it to melt out from under. With no data except my gut hunch, I'd not put aluminum unit in my own home. Until it had been on the market for several years. Christopher A. Young Learn more about Jesus www.lds.org .. "Smarty" wrote in message ... I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. |
All aluminum versus copper/aluminum coils for air conditioner?
On Mar 31, 5:47*am, Smarty wrote:
I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. GOOD QUESTION! How about doing what a friend of mine did when he went to purchase something he didn't know anything about - insurance. He set up appointments with several of the sales people ALL FOR THE SAME EXACT TIME got them into one room and asked the question, "Why should I buy yours and not theirs?" and turned them loose on each other to watch and listen. He said that within 20 minutes he learned ptifalls NEVER mentioned by any insurance agent/company what to buy and what NOT to buy, He said best education he ever went through. |
All aluminum versus copper/aluminum coils for air conditioner?
On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon"
wrote: It's been my experience that copper is a harder metal, and much easier to work with, in terms of soldering or brazing. I've not tried aluminum, I'd just expect it to melt out from under. With no data except my gut hunch, I'd not put aluminum unit in my own home. Until it had been on the market for several years. It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. |
All aluminum versus copper/aluminum coils for air conditioner?
On 3/31/2012 8:47 AM, Smarty wrote:
I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. As the original poster of this question, I am very sorry to see not a single reply............ This newsgroup really has become quite pathetic over the years, thanks to the combined efforts of those who think it deserves to be a place to discuss everything BUT home repair topics. To the trolls who like to post about getting their cock caught in a carpet stretcher, to harry who insists on rambling about all things political to all the other folks who seem to think this is the right place to show their skills in endless threads about nonsense, I say a big **** YOU as you have effectively weakened the value of a very useful forum and made it into a garbage pile. Maybe some new forum will arise where people with home repair issues won't be surrounded by these huge message turds which offer nothing of value to the average home repair person. |
All aluminum versus copper/aluminum coils for air conditioner?
On 3/31/2012 3:09 PM, Ed Pawlowski wrote:
On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon" wrote: It's been my experience that copper is a harder metal, and much easier to work with, in terms of soldering or brazing. I've not tried aluminum, I'd just expect it to melt out from under. With no data except my gut hunch, I'd not put aluminum unit in my own home. Until it had been on the market for several years. It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. Thanks Ed for your reply and information. I just noticed that you have taken the time to provide useful and helpful information which I appreciate very much, and I am going to go with the copper / Lennox approach. My very limited experience working with aluminum leads me to the same conclusion you state and copper seems like the better choice. I am guessing that aluminum is becoming popular more as a result of rising copper costs than other, technical reasons. Thanks again. |
All aluminum versus copper/aluminum coils for air conditioner?
You didn't see my post?
Thinking about it some more, well, I have read a bit about repairing aluminum, and it's a lot harder than repairing copper tubing. For that reason (as well as what I mentioned earlier), I'd avoid the aluminum unit. Christopher A. Young Learn more about Jesus www.lds.org .. "Smarty" wrote in message ... As the original poster of this question, I am very sorry to see not a single reply............ |
All aluminum versus copper/aluminum coils for air conditioner?
I didn't think you saw what I wrote.
Christopher A. Young Learn more about Jesus www.lds.org .. "Smarty" wrote in message ... On 3/31/2012 3:09 PM, Ed Pawlowski wrote: On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon" wrote: It's been my experience that copper is a harder metal, and much easier to work with, in terms of soldering or brazing. I've not tried aluminum, I'd just expect it to melt out from under. With no data except my gut hunch, I'd not put aluminum unit in my own home. Until it had been on the market for several years. It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. Thanks Ed for your reply and information. I just noticed that you have taken the time to provide useful and helpful information which I appreciate very much, and I am going to go with the copper / Lennox approach. My very limited experience working with aluminum leads me to the same conclusion you state and copper seems like the better choice. I am guessing that aluminum is becoming popular more as a result of rising copper costs than other, technical reasons. Thanks again. |
All aluminum versus copper/aluminum coils for air conditioner?
Smarty wrote:
On 3/31/2012 8:47 AM, Smarty wrote: I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. As the original poster of this question, I am very sorry to see not a single reply............ This newsgroup really has become quite pathetic over the years, thanks to the combined efforts of those who think it deserves to be a place to discuss everything BUT home repair topics. To the trolls who like to post about getting their cock caught in a carpet stretcher, to harry who insists on rambling about all things political to all the other folks who seem to think this is the right place to show their skills in endless threads about nonsense, I say a big **** YOU as you have effectively weakened the value of a very useful forum and made it into a garbage pile. Maybe some new forum will arise where people with home repair issues won't be surrounded by these huge message turds which offer nothing of value to the average home repair person. I see several replies. Don't let the door hit you...... |
All aluminum versus copper/aluminum coils for air conditioner?
On 4/1/2012 6:58 PM, Stormin Mormon wrote:
I didn't think you saw what I wrote. Christopher A. Young Learn more about Jesus www.lds.org . wrote in message ... On 3/31/2012 3:09 PM, Ed Pawlowski wrote: On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon" wrote: It's been my experience that copper is a harder metal, and much easier to work with, in terms of soldering or brazing. I've not tried aluminum, I'd just expect it to melt out from under. With no data except my gut hunch, I'd not put aluminum unit in my own home. Until it had been on the market for several years. It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. Thanks Ed for your reply and information. I just noticed that you have taken the time to provide useful and helpful information which I appreciate very much, and I am going to go with the copper / Lennox approach. My very limited experience working with aluminum leads me to the same conclusion you state and copper seems like the better choice. I am guessing that aluminum is becoming popular more as a result of rising copper costs than other, technical reasons. Thanks again. For reasons unknown, your prior post did not show up but I do appreciate your reply now that I have read it. My gut reaction closely follows your advice and opinion, and I am committed to copper for this next a/c unit. Tonight I did find this article (see link below) from a company which apparently offers (only) aluminum and not copper heat exchangers / coils, and they offer claims that aluminum is superior, but I am not convinced. If they offered both and showed the relative benefits of each, I might find it more convincing. I guess I am both too old and also too old-fashion to get very excited about an all aluminum solution. Since Trane is the only A/C manufacturer using it as far as I know, I have to believe it is not the obviously better solution, especially given the relative costs of copper versus aluminum. Thanks again for replying. http://www.hydro.com/en/Subsites/Hyd...um-and-copper/ |
All aluminum versus copper/aluminum coils for air conditioner?
On Sun, 01 Apr 2012 22:52:41 -0400, Smarty wrote:
Tonight I did find this article (see link below) from a company which apparently offers (only) aluminum and not copper heat exchangers / coils, and they offer claims that aluminum is superior, but I am not convinced. If they offered both and showed the relative benefits of each, I might find it more convincing. I guess I am both too old and also too old-fashion to get very excited about an all aluminum solution. Since Trane is the only A/C manufacturer using it as far as I know, I have to believe it is not the obviously better solution, especially given the relative costs of copper versus aluminum. Thanks again for replying. http://www.hydro.com/en/Subsites/Hyd...um-and-copper/ This, IMO, is the most important line of the story: "Thus, together with the cost savings of replacing copper with aluminium, the accumulated benefits of switching to all-aluminium heat exchangers are considerable." It about the money. |
All aluminum versus copper/aluminum coils for air conditioner?
On Apr 1, 7:04*pm, "Bob F" wrote:
Smarty wrote: On 3/31/2012 8:47 AM, Smarty wrote: I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. As the original poster of this question, I am very sorry to see not a single reply............ This newsgroup really has become quite pathetic over the years, thanks to the combined efforts of those who think it deserves to be a place to discuss everything BUT home repair topics. To the trolls who like to post about getting their cock caught in a carpet stretcher, to harry who insists on rambling about all things political to all the other folks who seem to think this is the right place to show their skills in endless threads about nonsense, I say a big **** YOU as you have effectively weakened the value of a very useful forum and made it into a garbage pile. Maybe some new forum will arise where people with home repair issues won't be surrounded by these huge message turds which offer nothing of value to the average home repair person. I see several replies. Don't let the door hit you......- Hide quoted text - Yeah, exactly. He got replies from 4 different people and he's bitching? |
All aluminum versus copper/aluminum coils for air conditioner?
On Mon, 02 Apr 2012 05:50:25 -0400, Ed Pawlowski wrote:
On Sun, 01 Apr 2012 22:52:41 -0400, Smarty wrote: Tonight I did find this article (see link below) from a company which apparently offers (only) aluminum and not copper heat exchangers / coils, and they offer claims that aluminum is superior, but I am not convinced. If they offered both and showed the relative benefits of each, I might find it more convincing. I guess I am both too old and also too old-fashion to get very excited about an all aluminum solution. Since Trane is the only A/C manufacturer using it as far as I know, I have to believe it is not the obviously better solution, especially given the relative costs of copper versus aluminum. Thanks again for replying. http://www.hydro.com/en/Subsites/Hyd...um-and-copper/ This, IMO, is the most important line of the story: "Thus, together with the cost savings of replacing copper with aluminium, the accumulated benefits of switching to all-aluminium heat exchangers are considerable." It about the money. It's always about the money, but saying that doesn't tell you much. Silver is a better conductor than copper. I don't have a Trane system, but I wouldn't avoid one because it uses aluminum coils. Trane markets their Spine-fin aluminum coils as a selling point. They've been selling them for outdoor units since 1968. The coils are only one part of a system. I don't know the cost difference between the manufacturers. I would grill some *good* HVAC guys to find out about his. You don't want somebody selling you a crap system with a lousy compressor and inefficient operation because he brags "This unit has copper coils." BFD. In this thread it's said aluminum heat exchanger manufacturing cost eats up the savings vs using copper. http://hvac-talk.com/vbb/showthread.php?t=139016 But that thread is from 2007, when copper prices were lower. Here "something" more. Probably all marketing BS. http://www.sapagroup.com/pages/26202...hite_paper.pdf http://www.alcoil.net/applications.htm Anyway, there are SEER ratings, and HVAC guys who have long experience with this. Whether it's aluminum or copper is just one thing to consider. My furnace and central air is Rheem. Except for getting the main board replaced, it's all worked fine for 13 years. Why do I have a Rheem? Because my brother was a GC then, needed the work, and had a HVAC installer sub who needed work. They decided I got Rheem.. Maybe I could have done better on the cost by shopping, maybe not. But hey. what goes around comes around. --Vic |
All aluminum versus copper/aluminum coils for air conditioner?
On 4/2/2012 9:14 AM, Vic Smith wrote:
On Mon, 02 Apr 2012 05:50:25 -0400, Ed wrote: On Sun, 01 Apr 2012 22:52:41 -0400, wrote: Tonight I did find this article (see link below) from a company which apparently offers (only) aluminum and not copper heat exchangers / coils, and they offer claims that aluminum is superior, but I am not convinced. If they offered both and showed the relative benefits of each, I might find it more convincing. I guess I am both too old and also too old-fashion to get very excited about an all aluminum solution. Since Trane is the only A/C manufacturer using it as far as I know, I have to believe it is not the obviously better solution, especially given the relative costs of copper versus aluminum. Thanks again for replying. http://www.hydro.com/en/Subsites/Hyd...um-and-copper/ This, IMO, is the most important line of the story: "Thus, together with the cost savings of replacing copper with aluminium, the accumulated benefits of switching to all-aluminium heat exchangers are considerable." It about the money. It's always about the money, but saying that doesn't tell you much. Silver is a better conductor than copper. I don't have a Trane system, but I wouldn't avoid one because it uses aluminum coils. Trane markets their Spine-fin aluminum coils as a selling point. They've been selling them for outdoor units since 1968. The coils are only one part of a system. I don't know the cost difference between the manufacturers. I would grill some *good* HVAC guys to find out about his. You don't want somebody selling you a crap system with a lousy compressor and inefficient operation because he brags "This unit has copper coils." BFD. In this thread it's said aluminum heat exchanger manufacturing cost eats up the savings vs using copper. http://hvac-talk.com/vbb/showthread.php?t=139016 But that thread is from 2007, when copper prices were lower. Here "something" more. Probably all marketing BS. http://www.sapagroup.com/pages/26202...hite_paper.pdf http://www.alcoil.net/applications.htm Anyway, there are SEER ratings, and HVAC guys who have long experience with this. Whether it's aluminum or copper is just one thing to consider. My furnace and central air is Rheem. Except for getting the main board replaced, it's all worked fine for 13 years. Why do I have a Rheem? Because my brother was a GC then, needed the work, and had a HVAC installer sub who needed work. They decided I got Rheem.. Maybe I could have done better on the cost by shopping, maybe not. But hey. what goes around comes around. --Vic Thanks Ed and Vic for your replies and comments. I agree with the basic motivation being financial, but really have no good way to compare reliability and failure rates in any other meaningful way. Consumer Reports seems to be silent on the whole matter of central A/C reliability. And even if they published historical data, the move to Purson and these much higher pressures may change the game entirely in terms of who has the better components in the long term. Like most things, it will be a bit of a coin toss in the final analysis, but I wanted to see if this whole aluminum versus copper thing was a "red herring" thrown out by a dealer whose profit potential or other motives makes him sell both Lennox and Trane, and then recommend Trane for this specific reason of aluminum coils. Thanks again! |
All aluminum versus copper/aluminum coils for air conditioner?
On Mon, 2 Apr 2012 06:04:13 -0700 (PDT), "
wrote: On Apr 1, 7:04Â*pm, "Bob F" wrote: Smarty wrote: On 3/31/2012 8:47 AM, Smarty wrote: I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. As the original poster of this question, I am very sorry to see not a single reply............ This newsgroup really has become quite pathetic over the years, thanks to the combined efforts of those who think it deserves to be a place to discuss everything BUT home repair topics. To the trolls who like to post about getting their cock caught in a carpet stretcher, to harry who insists on rambling about all things political to all the other folks who seem to think this is the right place to show their skills in endless threads about nonsense, I say a big **** YOU as you have effectively weakened the value of a very useful forum and made it into a garbage pile. Maybe some new forum will arise where people with home repair issues won't be surrounded by these huge message turds which offer nothing of value to the average home repair person. I see several replies. Don't let the door hit you......- Hide quoted text - Yeah, exactly. He got replies from 4 different people and he's bitching? He probably didn't see any from google groups. They went into limboland until today. Did for me anyway. A bunch of 3-4 day old posts just appeared. |
All aluminum versus copper/aluminum coils for air conditioner?
replying to Smarty , Shep wrote:
nobody wrote: Thanks Ed for your reply and information. I just noticed that you have taken the time to provide useful and helpful information which I appreciate very much, and I am going to go with the copper / Lennox approach. My very limited experience working with aluminum leads me to the same conclusion you state and copper seems like the better choice. I am guessing that aluminum is becoming popular more as a result of rising copper costs than other, technical reasons. Thanks again. I did a little research, and it seems formaldehyde forms formic acid on copper coils. Since the SEER minimum increase to 13, manufacturers started making copper coils even thinner, which leads to faster corrosion and holes caused by formic acid. Aluminum coils are not susceptible to this deterioration and holes from formic acid. -- |
All aluminum versus copper/aluminum coils for air conditioner?
replying to Smarty , mangino wrote:
nobody wrote: I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. My Carrier air conditioning units are almost 9 years old and the copper evaporator coils are totally rusted. I have an air conditioning guy that I totally trust and he told me something interesting. He said that Carrier knows that there are issues with the coils rusting out prematurely. Carrier use to have all aluminum coils and aluminum never rusts. Carrier and other manufacturers realized if they switched to copper coils their customers would have to replace their coils approximately every 6 to 8 years (10 years if you were lucky). So it all comes down to what's called "Planned Obsolescence" and you see it practiced with almost everything you buy these days. It just puts more money back in the pockets of the manufacturer and repair industry. He also told me that Carrier and others are starting to bring back aluminum because of the backlash from customers. I am now getting aluminum coils installed. -- |
All aluminum versus copper/aluminum coils for air conditioner?
a good friend from the 1970s who taught HVAC around here highly recommends goodman. they use standard parts that are commonly availble from many sources.
unlike trane and others that use OEM parts with no alternate suppliers, so they decide when a model is obsolete. they just quit supplying parts. my goodman is working fine its 8 or 10 years old and came with a great warranty |
All aluminum versus copper/aluminum coils for air conditioner?
On Saturday, April 18, 2015 at 10:44:04 PM UTC-4, mangino wrote:
replying to Smarty , mangino wrote: nobody wrote: I have spoken with several HVAC contractors regarding replacement of my old Lennox central air conditioning system. All of them are Lennox dealers except one who also carries Trane products. The dealer who also carries Trane was trying to switch me from my original Lennox preference, stating that the Trane coils, which are 100% aluminum, rather than the Lennox coils, which use aluminum fins and copper tubing, provide a better, longer lasting design. He felt that Trane was superior in other ways also, since they used "composite plastics" in the outdoor condensing unit case rather than steel to ensure that no corrosion or rusting would occur. The basic claim was that Trane, using aluminum for all of the refrigeration loop, had a longer life expectancy that Lennox, given the newer Puron refrigerant. Does anyone have any experience with Trane, and is there any science to support this type of claim or any other prior experience to say that Trane is somehow better? Thanks for any advice. My Carrier air conditioning units are almost 9 years old and the copper evaporator coils are totally rusted. I have an air conditioning guy that I totally trust and he told me something interesting. He said that Carrier knows that there are issues with the coils rusting out prematurely. Carrier use to have all aluminum coils and aluminum never rusts. Carrier and other manufacturers realized if they switched to copper coils their customers would have to replace their coils approximately every 6 to 8 years (10 years if you were lucky). So it all comes down to what's called "Planned Obsolescence" and you see it practiced with almost everything you buy these days. It just puts more money back in the pockets of the manufacturer and repair industry. He also told me that Carrier and others are starting to bring back aluminum because of the backlash from customers. I am now getting aluminum coils installed. -- Seems kind of odd that Carrier would switch to copper from aluminum on the theory of making some more money. If your evaporator goes at 8 years, how many customers are going to go with another Carrier or even an evaporator replacement? At that point, most people are going to get a new system and it likely wouldn't be Carrier. Also given the cost delta between copper and aluminum, I find it hard to believe it's even true that Carrier went back to copper coils, unless there is some other valid reason for it. |
All aluminum versus copper/aluminum coils for air conditioner?
On 4/19/2015 9:10 AM, trader_4 wrote:
Seems kind of odd that Carrier would switch to copper from aluminum on the theory of making some more money. If your evaporator goes at 8 years, how many customers are going to go with another Carrier or even an evaporator replacement? At that point, most people are going to get a new system and it likely wouldn't be Carrier. Also given the cost delta between copper and aluminum, I find it hard to believe it's even true that Carrier went back to copper coils, unless there is some other valid reason for it. Things have probably changes since I worked for a company that made coils. Back then, they were copper and full aluminum was just starting to be made by a couple of companies. The only reason they changed was cost. We had been making copper coils for many years and it would have been costly to change over with all the equipment involved and we did not make large quantities of a given size like Carrier. We did specialties from 6" x 6" to 4' x 20' For tubing we used copper, brass, cupro-nickle |
All aluminum versus copper/aluminum coils for air conditioner?
replying to trader_4 , mangino wrote:
trader4 wrote: Seems kind of odd that Carrier would switch to copper from aluminum on the theory of making some more money. If your evaporator goes at 8 years, how many customers are going to go with another Carrier or even an evaporator replacement? At that point, most people are going to get a new system and it likely wouldn't be Carrier. Also given the cost delta between copper and aluminum, I find it hard to believe it's even true that Carrier went back to copper coils, unless there is some other valid reason for it. Yes there is another valid reason for the switch to aluminum (in addition to planned obsolence) and it's called Formicary Corrosion. You can get the FACTS by reading the industry research report containing scientific studies and analysis going into the details of aluminum versus copper. These are details you won't get from your air conditioning company. Here's the link : http://www.conditionedairsolutions.c...1-20345-25.pdf -- |
All aluminum versus copper/aluminum coils for air conditioner?
On 4/19/2015 12:44 PM, mangino wrote:
Yes there is another valid reason for the switch to aluminum (in addition to planned obsolence) and it's called Formicary Corrosion. You can get the FACTS by reading the industry research report containing scientific studies and analysis going into the details of aluminum versus copper. These are details you won't get from your air conditioning company. Here's the link : http://www.conditionedairsolutions.c...1-20345-25.pdf While I found the link interesting, how do you expect us to continue a discussion when you mess up a lot of good arguments with FACTS? |
All aluminum versus copper/aluminum coils for air conditioner?
On Sunday, April 19, 2015 at 4:21:47 PM UTC-4, Ed Pawlowski wrote:
On 4/19/2015 12:44 PM, mangino wrote: Yes there is another valid reason for the switch to aluminum (in addition to planned obsolence) and it's called Formicary Corrosion. You can get the FACTS by reading the industry research report containing scientific studies and analysis going into the details of aluminum versus copper. These are details you won't get from your air conditioning company. Here's the link : http://www.conditionedairsolutions.c...1-20345-25.pdf While I found the link interesting, how do you expect us to continue a discussion when you mess up a lot of good arguments with FACTS? The facts here would seem to be that the document he just provided is exactly opposite to what he's claiming. He stated that Carrier allegedly switched to copper coils from aluminum so that they would fail faster. Yet the document says Carrier is using aluminum coils because they are corrosion resistant and superior. I don't see them saying they went back to copper..... So, I don't see what all the fuss is about. |
All aluminum versus copper/aluminum coils for air conditioner?
"Ed Pawlowski" wrote in message
... On 4/19/2015 12:44 PM, mangino wrote: http://www.conditionedairsolutions.c...1-20345-25.pdf While I found the link interesting, how do you expect us to continue a discussion when you mess up a lot of good arguments with FACTS? I am sure that there are enough posters here to sustain *any* argument, with or without facts. When I saw the word formicary (formica means ant in Italian) I decided to go look it up to see if it was related to ants (or Formica - which people tell me stands for "FORmerly MICArta). This is another site that describes the problem and claims it can occur within two months after manufacture. http://www.microchannelfacts.com/formicary-corrosion Formicary corrosion is a type of corrosion also referred to by HVAC contractors as "ant's nest" corrosion. They say it can't be seen with the naked eye but I assume if any kind of corrosion gets bad enough, it will become visible to normal vision. Learn something new every day! -- Bobby G. |
All aluminum versus copper/aluminum coils for air conditioner?
replying to mangino , DCB wrote:
mangino wrote: My Carrier air conditioning units are almost 9 years old and the copper evaporator coils are totally rusted. I have an air conditioning guy that I totally trust and he told me something interesting. He said that Carrier knows that there are issues with the coils rusting out prematurely. Carrier use to have all aluminum coils and aluminum never rusts. Carrier and other manufacturers realized if they switched to copper coils their customers would have to replace their coils approximately every 6 to 8 years (10 years if you were lucky). So it all comes down to what's called "Planned Obsolescence" and you see it practiced with almost everything you buy these days. It just puts more money back in the pockets of the manufacturer and repair industry. He also told me that Carrier and others are starting to bring back aluminum because of the backlash from customers. I am now getting aluminum coils installed. LOL Copper does not RUST.... Hilarious -- |
All aluminum versus copper/aluminum coils for air conditioner?
replying to mangino , DCB wrote:
mangino wrote: Yes there is another valid reason for the switch to aluminum (in addition to planned obsolence) and it's called Formicary Corrosion. You can get the FACTS by reading the industry research report containing scientific studies and analysis going into the details of aluminum versus copper. These are details you won't get from your air conditioning company. Here's the link : http://www.conditionedairsolutions.c...1-20345-25.pdf So Silly, one it is difficulty to diagnose, two less that 10% of all AC systems have been affected by Formicary Corrosion; and it is usually caused by contaminants in the "sealed" system. -- |
All aluminum versus copper/aluminum coils for air conditioner?
replying to Robert Green , DCB wrote:
robert_green1963 wrote: "Ed Pawlowski" wrote in message ... http://www.conditionedairsolutions.c...1-20345-25.pdf I am sure that there are enough posters here to sustain *any* argument, with or without facts. When I saw the word formicary (formica means ant in Italian) I decided to go look it up to see if it was related to ants (or Formica - which people tell me stands for "FORmerly MICArta). This is another site that describes the problem and claims it can occur within two months after manufacture. http://www.microchannelfacts.com/formicary-corrosion Formicary corrosion is a type of corrosion also referred to by HVAC contractors as "ant's nest" corrosion. They say it can't be seen with the naked eye but I assume if any kind of corrosion gets bad enough, it will become visible to normal vision. Learn something new every day! Formicary Corrosion can never been seen, it is the very definition of the pin hole mesh; It is rare and is usually caused internally not externally with the introduction of a acidic contaminant in the system. Copper is tried an true, lasts for decades, provides 2X the heat exchange. (it is the reason that ALL computer CPU cooling is COPPER) Aluminum is cheaper and easier to bend; which is important because the MFG's have to come up with creative solutions to make up for the reduced heat transfer. Additionally, copper is easier to repair and unless the Aluminum system does not have copper anywhere it is more likely to see corrosion where Aluminum touches copper then copper has of Formicary Corrosion Cheers -- |
All aluminum versus copper/aluminum coils for air conditioner?
On Thu, 23 Jul 2015 23:44:01 +0000, DCB
wrote: replying to Robert Green , DCB wrote: robert_green1963 wrote: "Ed Pawlowski" wrote in message ... http://www.conditionedairsolutions.c...1-20345-25.pdf I am sure that there are enough posters here to sustain *any* argument, with or without facts. When I saw the word formicary (formica means ant in Italian) I decided to go look it up to see if it was related to ants (or Formica - which people tell me stands for "FORmerly MICArta). This is another site that describes the problem and claims it can occur within two months after manufacture. http://www.microchannelfacts.com/formicary-corrosion Formicary corrosion is a type of corrosion also referred to by HVAC contractors as "ant's nest" corrosion. They say it can't be seen with the naked eye but I assume if any kind of corrosion gets bad enough, it will become visible to normal vision. Learn something new every day! Formicary Corrosion can never been seen, it is the very definition of the pin hole mesh; It is rare and is usually caused internally not externally with the introduction of a acidic contaminant in the system. Copper is tried an true, lasts for decades, provides 2X the heat exchange. (it is the reason that ALL computer CPU cooling is COPPER) You'd be surprized how many CPU heat sinks have absolutely NO copper in them. I've even got a pile of them tat a magnet will stick to - not very well, being stainless steel of all things (very poor thermal conductivity, but goot thermal mass - with heat pipes to stainless steel fins, plus folded fins that appear to be aluminum (definitely not copper) fused to the stainless plate. These all came from P4 and Core Duo equipped Lenovo desktop units. Most of the rest of my stask are extruded aliminum -I had a couple copper ones from ancient Dell PCs (Inspiron 2400??) Aluminum is cheaper and easier to bend; which is important because the MFG's have to come up with creative solutions to make up for the reduced heat transfer. Additionally, copper is easier to repair and unless the Aluminum system does not have copper anywhere it is more likely to see corrosion where Aluminum touches copper then copper has of Formicary Corrosion Cheers |
All aluminum versus copper/aluminum coils for air conditioner?
wrote in message
stuff snipped I have a huge box of heat sinks from computers that date back to the 60s through P4 class machines and they are all aluminum. The only copper I have ever seen is in a WYSE "thin client" machine and it is a short 6 gauge copper wire that connects the aluminum CPU heat sink to a much larger aluminum heat sink next to it. I've got a bunch of heat sinks/cooling fans for CPUs and some of them did have a highly polished copper insert that sat right on the chip (with thermal gunk - amazing how much of a difference that stuff makes!) But by and large they were mostly huge junks of aluminum. There were also sinks that had a bracket that allowed use of a slower, quieter (and harder to plug with dirt) 80cm cooling fan suspended over the CPU. I bought a lot of spares and then switched almost exclusively to tablet PC's I got from Ebay. )-: Not sure what to do with all those spares and for that matter all the SCSI cards, 10Mb NICs, Archive tape controllers (a whopping 250Mb of backup tape - huge for its time), old modem cards, ISA controllers, EISA controllers, SCSI cables (I, II and III) and a host of other stuff from days gone by. Did I mention my wife says I am a hoarder? (-: -- Bobby G. |
All aluminum versus copper/aluminum coils for air conditioner?
On Fri, 24 Jul 2015 09:56:58 -0400, "Robert Green"
wrote: wrote in message stuff snipped I have a huge box of heat sinks from computers that date back to the 60s through P4 class machines and they are all aluminum. The only copper I have ever seen is in a WYSE "thin client" machine and it is a short 6 gauge copper wire that connects the aluminum CPU heat sink to a much larger aluminum heat sink next to it. I've got a bunch of heat sinks/cooling fans for CPUs and some of them did have a highly polished copper insert that sat right on the chip (with thermal gunk - amazing how much of a difference that stuff makes!) But by and large they were mostly huge junks of aluminum. There were also sinks that had a bracket that allowed use of a slower, quieter (and harder to plug with dirt) 80cm cooling fan suspended over the CPU. I bought a lot of spares and then switched almost exclusively to tablet PC's I got from Ebay. )-: Not sure what to do with all those spares and for that matter all the SCSI cards, 10Mb NICs, Archive tape controllers (a whopping 250Mb of backup tape - huge for its time), old modem cards, ISA controllers, EISA controllers, SCSI cables (I, II and III) and a host of other stuff from days gone by. Did I mention my wife says I am a hoarder? (-: My wife says I'm a hoarder and I threw most of THAT stuff out 5 years ago!!!!! |
All aluminum versus copper/aluminum coils for air conditioner?
replying to Robert Green , DCB wrote:
robert_green1963 wrote: wrote in message stuff snipped I've got a bunch of heat sinks/cooling fans for CPUs and some of them did have a highly polished copper insert that sat right on the chip (with thermal gunk - amazing how much of a difference that stuff makes!) But by and large they were mostly huge junks of aluminum. There were also sinks that had a bracket that allowed use of a slower, quieter (and harder to plug with dirt) 80cm cooling fan suspended over the CPU. I bought a lot of spares and then switched almost exclusively to tablet PC's I got from Ebay. )-: Not sure what to do with all those spares and for that matter all the SCSI cards, 10Mb NICs, Archive tape controllers (a whopping 250Mb of backup tape - huge for its time), old modem cards, ISA controllers, EISA controllers, SCSI cables (I, II and III) and a host of other stuff from days gone by. Did I mention my wife says I am a hoarder? (-: -- Bobby G. If you cut them open you will find that any decent heat sink for high speed processors all have copper heat tubes and copper exchangers. They can have aluminum fins but the heat exchange is copper, why? because copper has 2x the thermal exchange of aluminum. Also I find it interesting that the Carrier article is about evaporator coils not condenser coils, yet its the condenser coils that are being changed to aluminum while almost all of the evaporator coils remain copper. -- |
All aluminum versus copper/aluminum coils for air conditioner?
On Sat, 25 Jul 2015 03:44:01 +0000, DCB
wrote: replying to Robert Green , DCB wrote: robert_green1963 wrote: wrote in message stuff snipped I've got a bunch of heat sinks/cooling fans for CPUs and some of them did have a highly polished copper insert that sat right on the chip (with thermal gunk - amazing how much of a difference that stuff makes!) But by and large they were mostly huge junks of aluminum. There were also sinks that had a bracket that allowed use of a slower, quieter (and harder to plug with dirt) 80cm cooling fan suspended over the CPU. I bought a lot of spares and then switched almost exclusively to tablet PC's I got from Ebay. )-: Not sure what to do with all those spares and for that matter all the SCSI cards, 10Mb NICs, Archive tape controllers (a whopping 250Mb of backup tape - huge for its time), old modem cards, ISA controllers, EISA controllers, SCSI cables (I, II and III) and a host of other stuff from days gone by. Did I mention my wife says I am a hoarder? (-: -- Bobby G. If you cut them open you will find that any decent heat sink for high speed processors all have copper heat tubes and copper exchangers. They can have aluminum fins but the heat exchange is copper, why? because copper has 2x the thermal exchange of aluminum. Only heat sinks with heat pipes genereally have copper cores (because they are a lot easier to braze and solder than aluminum) I DO have a copper aftermarket heat sink I forgot about - and even IT has a stainless steel thermal mass plate into which the4 heat pipes are fitted. It's a "ZeroTherm" BTF95 (Butterfly) passive unit (no fan) and also has a copper "transfer pad". These tend to be used by the same geeks that buy "oxygen free" copper speaker cables. The reviews tend to re-enforce my opinion - They dont cool worth squat. (at $60 MSRP it does not outperform the OEM intel aluminum heat sink) Also I find it interesting that the Carrier article is about evaporator coils not condenser coils, yet its the condenser coils that are being changed to aluminum while almost all of the evaporator coils remain copper. |
All aluminum versus copper/aluminum coils for air conditioner?
replying to Ed Pawlowski , mj wrote:
esp wrote: On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon" It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. I have a 3 year old Trane 4 ton unit. It has aluminum coil. It has been serviced 9 times for slime on the coils. I have been told that if it had some copper, like my two 1 1/2 ton units, I would not have this problem. My repair company is trying something new-laying pieces of copper tubing in the pan to try to stop the slime build up. -- |
All aluminum versus copper/aluminum coils for air conditioner?
On Thursday, October 8, 2015 at 2:44:06 PM UTC-4, mj wrote:
replying to Ed Pawlowski , mj wrote: esp wrote: On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon" It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. I have a 3 year old Trane 4 ton unit. It has aluminum coil. It has been serviced 9 times for slime on the coils. I have been told that if it had some copper, like my two 1 1/2 ton units, I would not have this problem. My repair company is trying something new-laying pieces of copper tubing in the pan to try to stop the slime build up. -- Interesting. I know copper is used in boat bottom paint because it's toxic to barnacles. Which leave one wondering how it's OK in copper water pipe? I guess very little leaches out? But if that's the case, how would having copper tubing in the coils kill slime? Zinc is used on roofs with problems to keep algae from growing. If you drive around here, you can see roofs where there is no algae on the roofs below flashings, vents, etc that are made of zinc. |
All aluminum versus copper/aluminum coils for air conditioner?
On 10/8/2015 3:01 PM, trader_4 wrote:
Interesting. I know copper is used in boat bottom paint because it's toxic to barnacles. Which leave one wondering how it's OK in copper water pipe? I guess very little leaches out? But if that's the case, how would having copper tubing in the coils kill slime? Zinc is used on roofs with problems to keep algae from growing. If you drive around here, you can see roofs where there is no algae on the roofs below flashings, vents, etc that are made of zinc. Science comes the full circle. Now they will come out with lead pills to deal with copper poisoning. - .. Christopher A. Young learn more about Jesus .. www.lds.org .. .. |
All aluminum versus copper/aluminum coils for air conditioner?
On Thursday, October 8, 2015 at 2:44:06 PM UTC-4, mj wrote:
replying to Ed Pawlowski , mj wrote: esp wrote: On Sat, 31 Mar 2012 11:06:48 -0400, "Stormin Mormon" It has been on the market for years. It is cheaper to build, more difficult to field repair. All aluminum coils were starting to come into play in the late 1960's. I worked for a company that made HVAC units until 1970 and we made our own copper tubed coils and they started to buy aluminum coils. I have a 3 year old Trane 4 ton unit. It has aluminum coil. It has been serviced 9 times for slime on the coils. I have been told that if it had some copper, like my two 1 1/2 ton units, I would not have this problem. My repair company is trying something new-laying pieces of copper tubing in the pan to try to stop the slime build up. -- So here is an interesting take. Whatever type of coil you have, water is the enemy. Of course water will form from condensation when it is cooling. So my take is that to reduce corrosion of the coil, set the blower to run all the time when you are using the AC. This way when the compressor cycles off, the blower will continue to run and air dry the coil. You don't want the coil to sit there wet for no reason. Mark |
All aluminum versus copper/aluminum coils for air conditioner?
replying to Smarty, eo wrote:
I think that Lenox is moving to aluminum at least for a while until new copper coils with less problams are available. At least when the copper cil in my new ( september 2015) slp98 system went bad with six leaks they put in an aluminum coil -- for full context, visit http://www.homeownershub.com/mainten...ne-690615-.htm |
All aluminum versus copper/aluminum coils for air conditioner?
Avoid Trane as their outdoor condensing unit coils are made using a unique design called 'Spine-Fin' and are notorious for loading up with cottonwood fluff, spider silk, etc.
I have worked in the HVAC trade and would like to share some up-to-date facts about copper versus aluminum condensing units and evaporator coils. 1a) Money - Copper prices went out of control high when the Chinese economy boomed prior to the Great Recession of 2008. It only reasonable for U.S. manufacturers to anticipate future copper metal price spikes in considering potential future cost and potential copper shortages. Aluminum metal is plentiful, but uses a great deal of electrical energy to refine the ore. Advantage aluminum. 1b) Aside from the cost of copper metal, aluminum coils are more difficult and costly to manufacture. This is in large measure because it is difficult to join aluminum tubes because of the thin layer of oxide that forms on aluminum. Copper is much easier to join and repair. New aluminum soldering alloys were developed over recent years that have improved the process of producing all-aluminum coils, although it is still remains difficult to repair an aluminum coil in the field. Advantage copper. 2) Higher refrigerant pressures - New EPA mandated chlorine-free refrigerants replaced long time standard HCFC refrigerant R-22 in 2012. An example of a new refrigerant is Carrier's Puron (which is known in the trade as R-410a) which operates at higher pressure than R-22, so the tubing used in making new condensing and evaporator coils must have thicker walls to resist the higher pressure. The new refrigerants heat-carrying ability, known as its enthalpy, fluid ounce for ounce, is about half that of R-22. Since about twice the mass flow is needed to move the same quantity of heat, larger coils are needed. Larger coils mean more metal used. A-coils in evaporators (at the furnace end) become N-coils to absorb the heat from the air stream, and condensers (found outdoors to move the heat into the air) must be much larger to handle double the flow of refrigerant. EPA also mandated higher Seasonal Energy Efficiency Ratios for air conditioners and heat pumps, requiring these coils to be made larger still. Advantage aluminum. 4) Corrosion - Copper coils are made with aluminum fins mounted in galvanized steel frames, which is a recipe for galvanic corrosion over time. Aluminum metal reacts with the oxygen in the air to produce a thin, but tough oxide coating that protects the underlying metal from corrosion. If the aluminum metal is scratched or scuffed, the protective oxide layer reforms immediately. Aluminum coils are all aluminum, and being homogeneous, do not suffer from galvanic corrosion the way three-metal copper coils do. The protection afforded by the oxide layer is not absolute; animal urine, like dogs sent marking or male cats spraying, and sea salt spray will destroy both copper and aluminum coils. Advantage aluminum. 4a) Chinese Drywall, More Corrosion - References are made in this thread to Formicary Corrosion a.k.a. Ant Nest Corrosion. Formic acid is an organic acid produced by ants to signal each other, but many organic acids will cause this deep pitting corrosion in copper. Some thread entries blame ants, but not one entry has named the actual cause of most of the recent spate of damage to U.S. HVAC equipment - hydrogen sulfide off-gassed by impurities in imported Chinese drywall. Because of its protective oxide layer, aluminum does not react with hydrogen sulfide the way copper does. Advantage aluminum. 5) Field serviceability - Repairing aluminum refrigeration tubing is much more challenging than repairing copper tubing. Copper can be heated all the way to cherry red glow without damage. It can be both brazed (temperature over 800 degrees F) or soldered (temperature below 800 degrees F). Aluminum heats up and as the temperature rises, without warning, melts onto a puddle.. When the temperature is tightly controlled, because of that thin, but tenacious layer of aluminum oxide mentioned earlier, solder or braze filler metal alloys have difficulty bonding to aluminum. Recently developed exotic and expensive fluxes are making field repair easier, but some technicians still refuse to even attempt a field repair on an aluminum coil, insisting on replacing it instead. Advantage copper. I think it is fair to say the future is all aluminum coils, both because of the cost savings in the cheaper metal, and continuing improvements in aluminum joining and repair techniques. If you want your new A/C or heat pump investment to last as long as possible, for a few hundred dollars extra, ask you contractor if the make and model they are offering is available with a 'Coastal' or 'Sea-Side' option. Units with this option are made with their coils coated with a very thin, but completely corrosion resistant polymer, and are assembled using stainless steel screws and bolts. They are intended for use near the ocean, but are equally good at resisting corrosion caused by a range urban threats from acid raid to cat pee. |
All times are GMT +1. The time now is 12:10 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter