DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Home Repair (https://www.diybanter.com/home-repair/)
-   -   Direct Drive vs Belt Drive for New Washer (https://www.diybanter.com/home-repair/266005-direct-drive-vs-belt-drive-new-washer.html)

Ulysses December 1st 08 07:50 PM

Direct Drive vs Belt Drive for New Washer
 
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another $20-
$30 for new "dogs" and a new coupler. A new Kenmore large capacity
washer from Sears is $299. The thing is it is a "steel belt drive"
and has a plastic case for the gearbox. I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs. There must be some reason why
new washers are belt drive. Any reason why a plastic case on the
gearbox is not as good as steel? On a direct-drive it seems like
there would be little stress on the seals and bearings but I'm not so
sure about a plastic box on a belt drive.

Art December 2nd 08 12:21 AM

Direct Drive vs Belt Drive for New Washer
 
We had a direct drive Kenmore that only lasted a few years with just 2
adults in the house hold. The underwater seal went in the agitator
destroying the transmission.


"Ulysses" wrote in message
...
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another $20-
$30 for new "dogs" and a new coupler. A new Kenmore large capacity
washer from Sears is $299. The thing is it is a "steel belt drive"
and has a plastic case for the gearbox. I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs. There must be some reason why
new washers are belt drive. Any reason why a plastic case on the
gearbox is not as good as steel? On a direct-drive it seems like
there would be little stress on the seals and bearings but I'm not so
sure about a plastic box on a belt drive.




[email protected] December 2nd 08 01:37 AM

Direct Drive vs Belt Drive for New Washer
 
"Art" wrote:

We had a direct drive Kenmore that only lasted a few years with just 2
adults in the house hold. The underwater seal went in the agitator
destroying the transmission.


Which model was it?

Hydrowave model?

Bob December 2nd 08 02:55 AM

Direct Drive vs Belt Drive for New Washer
 
Ulysses wrote:
... I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs...


More importantly, the direct drive is cheaper to manufacture. Most
consumers place more importance on a low price than maintainability.

HeyBub[_3_] December 2nd 08 03:51 AM

Direct Drive vs Belt Drive for New Washer
 
Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another
$20- $30 for new "dogs" and a new coupler. A new Kenmore large
capacity washer from Sears is $299. The thing is it is a "steel belt
drive" and has a plastic case for the gearbox. I was under the
impresson that direct-drive had pretty much replaced belt drive
washers due to lower maintenance and easier repairs. There must be
some reason why new washers are belt drive. Any reason why a plastic
case on the gearbox is not as good as steel? On a direct-drive it
seems like there would be little stress on the seals and bearings but
I'm not so sure about a plastic box on a belt drive.


$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.

Hmm. Let me think...



[email protected] December 2nd 08 04:11 AM

Direct Drive vs Belt Drive for New Washer
 
On Mon, 1 Dec 2008 18:21:41 -0500, "Art"
wrote:

We had a direct drive Kenmore that only lasted a few years with just 2
adults in the house hold. The underwater seal went in the agitator
destroying the transmission.


"Ulysses" wrote in message
...
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another $20-
$30 for new "dogs" and a new coupler. A new Kenmore large capacity
washer from Sears is $299. The thing is it is a "steel belt drive"
and has a plastic case for the gearbox. I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs. There must be some reason why
new washers are belt drive. Any reason why a plastic case on the
gearbox is not as good as steel? On a direct-drive it seems like
there would be little stress on the seals and bearings but I'm not so
sure about a plastic box on a belt drive.


Our first direct drive kenmore lastes 23 years through 2 kids with
cloth diapers. When the pump failed I replaced the whole washer. We
replaced the drive coupling under waerranty, and sold it after about 5
years and bought LG front loaders..

And don't even think about "american made". The ONLY Canadian or US
built washer we could have bought was - wait for this - a BOSCH.

[email protected] December 2nd 08 04:12 AM

Direct Drive vs Belt Drive for New Washer
 
On Mon, 01 Dec 2008 17:55:29 -0800, Bob wrote:

Ulysses wrote:
... I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs...


More importantly, the direct drive is cheaper to manufacture. Most
consumers place more importance on a low price than maintainability.



Any kluts with 10 thumbs can change the direct drive coupler on a
kenmore. As long as he owns a few tools. A flat screwdriver and a
vicegrip don't quite count.

Bob M December 2nd 08 11:31 AM

Direct Drive vs Belt Drive for New Washer
 

$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.

Hmm. Let me think...


I just replaced the direct drive coupling on my Whirlpool washer for $15
using a flat screwdriver and a phillips to get the cabinet off.

Worth it for me.

[email protected] December 2nd 08 09:23 PM

Direct Drive vs Belt Drive for New Washer
 
On Mon, 1 Dec 2008 20:51:26 -0600, "HeyBub"
wrote:

Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another
$20- $30 for new "dogs" and a new coupler. A new Kenmore large
capacity washer from Sears is $299. The thing is it is a "steel belt
drive" and has a plastic case for the gearbox. I was under the
impresson that direct-drive had pretty much replaced belt drive
washers due to lower maintenance and easier repairs. There must be
some reason why new washers are belt drive. Any reason why a plastic
case on the gearbox is not as good as steel? On a direct-drive it
seems like there would be little stress on the seals and bearings but
I'm not so sure about a plastic box on a belt drive.


$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.

Hmm. Let me think...

you forgot you still need the motor.

The coupler is about $27 and usually outlasts the belt about 2 or 3 to
1. And the labour involved is not substantially different.

[email protected] December 2nd 08 09:53 PM

Direct Drive vs Belt Drive for New Washer
 
On Dec 2, 3:23�pm, wrote:
On Mon, 1 Dec 2008 20:51:26 -0600, "HeyBub"
wrote:





Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? �In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. �I determined it needs a new
motor. �I can get a used motor for $45 but who knows how long that
will last. �A new motor is about $135 plus shipping. �Plus another
$20- $30 for new "dogs" and a new coupler. �A new Kenmore large
capacity washer from Sears is $299. �The thing is it is a "steel belt
drive" and has a plastic case for the gearbox. �I was under the
impresson that direct-drive had pretty much replaced belt drive
washers due to lower maintenance and easier repairs. �There must be
some reason why new washers are belt drive. �Any reason why a plastic
case on the gearbox is not as good as steel? �On a direct-drive it
seems like there would be little stress on the seals and bearings but
I'm not so sure about a plastic box on a belt drive.


$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.


Hmm. Let me think...


you forgot you still need the motor.

The coupler is about $27 and usually outlasts the belt about 2 or 3 to
1. And the labour involved is not substantially different.- Hide quoted text -

- Show quoted text -


sears service is the most costly way to get any appliance repaired.

most likely other parts will fail so belt doesnt matter much

Ulysses December 3rd 08 02:36 AM

Direct Drive vs Belt Drive for New Washer
 
On Dec 2, 12:53*pm, " wrote:
On Dec 2, 3:23 pm, wrote:





On Mon, 1 Dec 2008 20:51:26 -0600, "HeyBub"
wrote:


Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another
$20- $30 for new "dogs" and a new coupler. A new Kenmore large
capacity washer from Sears is $299. The thing is it is a "steel belt
drive" and has a plastic case for the gearbox. I was under the
impresson that direct-drive had pretty much replaced belt drive
washers due to lower maintenance and easier repairs. There must be
some reason why new washers are belt drive. Any reason why a plastic
case on the gearbox is not as good as steel? On a direct-drive it
seems like there would be little stress on the seals and bearings but
I'm not so sure about a plastic box on a belt drive.


$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.


Hmm. Let me think...


you forgot you still need the motor.


The coupler is about $27 and usually outlasts the belt about 2 or 3 to
1. And the labour involved is not substantially different.- Hide quoted text -


- Show quoted text -


sears service is the most costly way to get any appliance repaired.

most likely other parts will fail so belt doesnt matter much- Hide quoted text -

- Show quoted text -


The general consensus seems to be that none of them are any good :-|

Well, the motor could fail on any of them. So could the water pump.
So could the gearbox.

Whoever paid $27 for the coupler the price at www.searspartsdirect.com
is only $15.49 and the Agitator Dogs (wasn't that a movie by Quinten
Tarentino?) are $7.99. I found both on eBay for less than $9 total
including shipping. BTW that's for the newer, steel reinforced
coupler.

Meanwhile, back at the ranch....

I ended up getting a used motor (had them test it first) for $30 and
the washer works just fine now except it needs new dogs and the
coupler could use replacing. Thanks to everyone who helped and thanks
to others who posted long ago for Google to find. With the direct
drive all that is needed to replace the coupling (or the motor or
water pump or gearbox) is ten thumbs, a flat screwdriver, and a socket
wrench with a long extension. I don't think you could get the
agitator off with vice grips ;-)

The hard part now is to convince my wife she doesn't want a new
washer. Kinda tough this close to Christmas.

Ulysses December 3rd 08 03:19 AM

Direct Drive vs Belt Drive for New Washer
 
On Dec 1, 7:11*pm, wrote:
On Mon, 1 Dec 2008 18:21:41 -0500, "Art"





wrote:
We had a direct drive Kenmore that only lasted a few years with just 2
adults in the house hold. The underwater seal went in the agitator
destroying the transmission.


"Ulysses" wrote in message
...
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? *In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. *I determined it needs a new
motor. *I can get a used motor for $45 but who knows how long that
will last. *A new motor is about $135 plus shipping. *Plus another $20-
$30 for new "dogs" and a new coupler. *A new Kenmore large capacity
washer from Sears is $299. *The thing is it is a "steel belt drive"
and has a plastic case for the gearbox. *I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs. *There must be some reason why
new washers are belt drive. *Any reason why a plastic case on the
gearbox is not as good as steel? *On a direct-drive it seems like
there would be little stress on the seals and bearings but I'm not so
sure about a plastic box on a belt drive.


Our first *direct drive kenmore lastes 23 years through 2 kids with
cloth diapers. When the pump failed I replaced the whole washer. We
replaced the drive coupling under waerranty, and sold it after about 5
years and bought LG front loaders..

And don't even think about "american made". The ONLY Canadian or US
built washer we could have bought was - wait for this - a BOSCH.- Hide quoted text -

- Show quoted text -


LMAO A few years ago I bought a Nissan picup. It was made in USA.
My Fords were all made in Mexico.

Lp1331 1p1331 December 3rd 08 03:50 AM

Direct Drive vs Belt Drive for New Washer
 
There is an appliance parts house here that has the couplers for under
$4.00. They are actually easier to replace than the belt on the old
Whirlpool/Kenmores IMO. Those were a major PITA, especially if you never
did one before (or often enough to remember how). I recently bought a
set of the dogs for the agitator for a friend's machine but haven't
gotten around to installing them yet. Forgot exactly what they cost. Do
all the direct drive machines have that "ratchet" setup on the agitator
or just certain models? My own machine is an old Montgomery Wards
(Norge) that my aunt gave me when she inhereted her mother's nearly new
machine. I've had it for about 30 years.It washes great, but is the
noisiest machine ever made. Years ago my sister had a similar one and
left it with the old house when they moved because it was so noisy. I
replaced the belt about 4 or 5 years ago--talk about easy! No tools at
all. Just had to lean the machine back enough to get my hand under it.
The motor has a spring tensioner on it so you just crank the belt on.
Hardest part was draining the machine. Belts NEVER break unless the
machine is full of water, and this one has a huge tub. Yeah, I know it
is ineffiecient from that standpoint, but it drains out into the yard,so
the water is not wasted. Larry


[email protected] December 3rd 08 04:11 AM

Direct Drive vs Belt Drive for New Washer
 
On Tue, 2 Dec 2008 12:53:35 -0800 (PST), "
wrote:

On Dec 2, 3:23?pm, wrote:
On Mon, 1 Dec 2008 20:51:26 -0600, "HeyBub"
wrote:





Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? ?In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. ?I determined it needs a new
motor. ?I can get a used motor for $45 but who knows how long that
will last. ?A new motor is about $135 plus shipping. ?Plus another
$20- $30 for new "dogs" and a new coupler. ?A new Kenmore large
capacity washer from Sears is $299. ?The thing is it is a "steel belt
drive" and has a plastic case for the gearbox. ?I was under the
impresson that direct-drive had pretty much replaced belt drive
washers due to lower maintenance and easier repairs. ?There must be
some reason why new washers are belt drive. ?Any reason why a plastic
case on the gearbox is not as good as steel? ?On a direct-drive it
seems like there would be little stress on the seals and bearings but
I'm not so sure about a plastic box on a belt drive.


$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.


Hmm. Let me think...


you forgot you still need the motor.

The coupler is about $27 and usually outlasts the belt about 2 or 3 to
1. And the labour involved is not substantially different.- Hide quoted text -

- Show quoted text -


sears service is the most costly way to get any appliance repaired.

most likely other parts will fail so belt doesnt matter much



If they last anything like mine did I have no complaint - that's the
old Kenmore - built by Inglis in Cambridge Ontario. It lasted 27 years
of hard use.

However, Inglis is gone. Owned by Whirlpool. Crap is now built in
Mexico of poor grade scrap - no matter if it is Kenmore, Whirlpool, or
- get this - MAYTAG.. Still a few built in germany (yes, electrolux is
in the same pile). Some frontloaders MAY still be built in Ohio.. Some
GE (crap) may still be american made, who knows.



[email protected] December 3rd 08 04:14 AM

Direct Drive vs Belt Drive for New Washer
 
On Tue, 2 Dec 2008 17:36:02 -0800 (PST), Ulysses
wrote:

On Dec 2, 12:53Â*pm, " wrote:
On Dec 2, 3:23 pm, wrote:





On Mon, 1 Dec 2008 20:51:26 -0600, "HeyBub"
wrote:


Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another
$20- $30 for new "dogs" and a new coupler. A new Kenmore large
capacity washer from Sears is $299. The thing is it is a "steel belt
drive" and has a plastic case for the gearbox. I was under the
impresson that direct-drive had pretty much replaced belt drive
washers due to lower maintenance and easier repairs. There must be
some reason why new washers are belt drive. Any reason why a plastic
case on the gearbox is not as good as steel? On a direct-drive it
seems like there would be little stress on the seals and bearings but
I'm not so sure about a plastic box on a belt drive.


$150.00 for parts to repair the direct drive failure vs $6.00 for a new
belt.


Hmm. Let me think...


you forgot you still need the motor.


The coupler is about $27 and usually outlasts the belt about 2 or 3 to
1. And the labour involved is not substantially different.- Hide quoted text -


- Show quoted text -


sears service is the most costly way to get any appliance repaired.

most likely other parts will fail so belt doesnt matter much- Hide quoted text -

- Show quoted text -


The general consensus seems to be that none of them are any good :-|

Well, the motor could fail on any of them. So could the water pump.
So could the gearbox.

Whoever paid $27 for the coupler the price at www.searspartsdirect.com
is only $15.49 and the Agitator Dogs (wasn't that a movie by Quinten
Tarentino?) are $7.99. I found both on eBay for less than $9 total
including shipping. BTW that's for the newer, steel reinforced
coupler.

Meanwhile, back at the ranch....

I ended up getting a used motor (had them test it first) for $30 and
the washer works just fine now except it needs new dogs and the
coupler could use replacing. Thanks to everyone who helped and thanks
to others who posted long ago for Google to find. With the direct
drive all that is needed to replace the coupling (or the motor or
water pump or gearbox) is ten thumbs, a flat screwdriver, and a socket
wrench with a long extension. I don't think you could get the
agitator off with vice grips ;-)

The hard part now is to convince my wife she doesn't want a new
washer. Kinda tough this close to Christmas.



How old is your Kenmore? If it's 10 years old it will oullive 2 or 3
new ones - and if it's 15, it might STILL outlive 4 new ones.

Ulysses December 3rd 08 06:45 PM

Direct Drive vs Belt Drive for New Washer
 
On Dec 2, 7:14*pm, wrote:
On Tue, 2 Dec 2008 17:36:02 -0800 (PST), Ulysses



How old is your Kenmore? If it's 10 years old it will oullive 2 or 3
new ones - and if it's 15, it might STILL outlive 4 new ones.- Hide quoted text -

- Show quoted text -


Let me try this again (third try). I hope I have not triple-posted!

Howdy. I'm seeing a lot of familiar faces (nicks, anyway) here. Too
bad my ISP does not carry this NG and I have to resort to Google.

My Kenmore is probably about 10-12 years old. It has a steel (?)
housing for the gearbox. I took apart the gearbox when first trying
to determine what the problem was and it does have some plastic gears
but nothing looked worn or damaged. From what you are saying it would
be worth putting a new motor in it every 10 years, if needed, and
forget the new ones. I have some doubts about the switches and timer
lasting that long though. I originally bought this machine used for
something like $100 when my Whirlpool belt-drive washer wore out.
This washer was outside in the rain and snow for years while I was
trying to get a house built. Amazing that it still works. It was
covered when not in use. We used to fill it directly from the well
and then power it from a generator which may not have been good for
the motor. I never tried to repair the Whirlpool as it had been
subjected to my wife for over 10 years. This is my first washer
repair attempt and maybe I'll get better at analyzing these things but
so far it makes fixing a fuel-injected computerized car engine seem
easy.

When trying to determine if the motor was bad I also had to consider
the start switch on the motor, wiring in general, mechanical factors,
control switches, and the timer. Plus there is a small circuit board
next to the second rinse switch and I have no idea what it is for. I
was thinking it might be a motor speed controller that chopped the
waveforms like a dimmer switch since I had no slow speed on my motor.
Anyway, I'm learning. Slowly. I should probably get a generic washer
repair manual. Does Hayne's make one? I got a lot out of their small
engine repair manual.

Ulysses December 4th 08 02:43 AM

Direct Drive vs Belt Drive for New Washer
 
On Dec 3, 9:45*am, Ulysses wrote:
On Dec 2, 7:14*pm, wrote:

On Tue, 2 Dec 2008 17:36:02 -0800 (PST), Ulysses


How old is your Kenmore? If it's 10 years old it will oullive 2 or 3
new ones - and if it's 15, it might STILL outlive 4 new ones.- Hide quoted text -


- Show quoted text -


Let me try this again (third try). *I hope I have not triple-posted!

Howdy. *I'm seeing a lot of familiar faces (nicks, anyway) here. *Too
bad my ISP does not carry this NG and I have to resort to Google.

My Kenmore is probably about 10-12 years old. *It has a steel (?)
housing for the gearbox. *I took apart the gearbox when first trying
to determine what the problem was and it does have some plastic gears
but nothing looked worn or damaged. *From what you are saying it would
be worth putting a new motor in it every 10 years, if needed, and
forget the new ones. *I have some doubts about the switches and timer
lasting that long though. *I originally bought this machine used for
something like $100 when my Whirlpool belt-drive washer wore out.
This washer was outside in the rain and snow for years while I was
trying to get a house built. *Amazing that it still works. *It was
covered when not in use. *We used to fill it directly from the well
and then power it from a generator which may not have been good for
the motor. *I never tried to repair the Whirlpool as it had been
subjected to my wife for over 10 years. *This is my first washer
repair attempt and maybe I'll get better at analyzing these things but
so far it makes fixing a fuel-injected computerized car engine seem
easy.

When trying to determine if the motor was bad I also had to consider
the start switch on the motor, wiring in general, mechanical factors,
control switches, and the timer. *Plus there is a small circuit board
next to the second rinse switch and I have no idea what it is for. *I
was thinking it might be a motor speed controller that chopped the
waveforms like a dimmer switch since I had no slow speed on my motor.
Anyway, I'm learning. *Slowly. *I should probably get a generic washer
repair manual. *Does Hayne's make one? *I got a lot out of their small
engine repair manual.


A little update: I searched on eBay again and found lots of motors,
new and used, for reasonable prices and reasonable shipping. I didn't
find *any* the first time I looked. I also found timers, water pumps,
and other parts so it looks like it'll be possible to keep this thing
running for a very long time, assuming I can figure out what's wrong
with it ;-)

bb October 3rd 16 09:44 PM

Direct Drive vs Belt Drive for New Washer
 
replying to HeyBub, bb wrote:
hmm....let me think....6 bucks for the belt and how much for the repair guy to
come to the house? I don't do repairs.


--
for full context, visit http://www.homeownershub.com/mainten...er-345455-.htm



Oren[_2_] October 3rd 16 09:55 PM

Direct Drive vs Belt Drive for New Washer
 
On Mon, 03 Oct 2016 19:44:01 +0000, bb
m wrote:

replying to HeyBub, bb wrote:
hmm....let me think....6 bucks for the belt and how much for the repair guy to
come to the house? I don't do repairs.


HeyBub, won't be answering you now or in the future.

HeyBob[_2_] October 3rd 16 10:14 PM

Direct Drive vs Belt Drive for New Washer
 
On 10/03/2016 07:44 PM, bb wrote:
replying to HeyBub, bb wrote:
hmm....let me think....6 bucks for the belt and how much for the repair guy to
come to the house? I don't do repairs.


Service calls are approximately $110 for the first hour.


Jerome Davis September 29th 20 04:44 AM

Direct Drive vs Belt Drive for New Washer
 
I miss these washers. One way you can tell by the belt drive and direct drive is the unique woo-woo sound. On Monday, December 1, 2008 at 12:50:05 PM UTC-6, Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another $20-
$30 for new "dogs" and a new coupler. A new Kenmore large capacity
washer from Sears is $299. The thing is it is a "steel belt drive"
and has a plastic case for the gearbox. I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs. There must be some reason why
new washers are belt drive. Any reason why a plastic case on the
gearbox is not as good as steel? On a direct-drive it seems like
there would be little stress on the seals and bearings but I'm not so
sure about a plastic box on a belt drive.


Ralph Mowery September 29th 20 05:40 AM

Direct Drive vs Belt Drive for New Washer
 
In article ,
says...

I miss these washers. One way you can tell by the belt drive and direct drive is the unique woo-woo sound. On Monday, December 1, 2008 at 12:50:05 PM UTC-6, Ulysses wrote:
Any opinions on which is better for a new washing machine, belt-drive
or direct-drive? In a recent thread we were discussing my old Kenmore
direct-drive washer and how to fix it. I determined it needs a new
motor. I can get a used motor for $45 but who knows how long that
will last. A new motor is about $135 plus shipping. Plus another $20-
$30 for new "dogs" and a new coupler. A new Kenmore large capacity
washer from Sears is $299. The thing is it is a "steel belt drive"
and has a plastic case for the gearbox. I was under the impresson
that direct-drive had pretty much replaced belt drive washers due to
lower maintenance and easier repairs. There must be some reason why
new washers are belt drive. Any reason why a plastic case on the
gearbox is not as good as steel? On a direct-drive it seems like
there would be little stress on the seals and bearings but I'm not so
sure about a plastic box on a belt drive.




With the price of parts, I found it is usually just better to get a new
appliance. Chances are unless you get some high dollar items , any
thing made in the last 30 years is throw away.
You repair one thing and a year later something else breaks.



All times are GMT +1. The time now is 04:12 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter