Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 21
Default Polishing silestone

We are building a new house and have installed Silestone kitchen
countertops. When the installers put the countertops in place, they
used a cut-off grinder with masonry cutting wheel to cut out the holes
in the countertop for the cooktop and the sinks.

They left the scrap pieces of Silestone with me. I want to use these
scraps to make a table top, a board on which to knead dough, and a top
to put outside next to my charcoal grill.

Problem is the edges of the Silestone scraps are rough.

The installers had to cut a couple of my backsplashes and they
polished the cut ends using what looked like sanding discs on the cut-
off grinder. I think that all I need to polish the edges of the
Silestone scrap is something like a buffing disk with different grits
-- start with maybe 60 grit, go to 180 or 220 or more as the Silestone
is polished.

Anyone out there know how to do this??

Thanks.
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 272
Default Polishing silestone

Kickin' Ass and Takin' Names wrote:


The installers had to cut a couple of my backsplashes and they
polished the cut ends using what looked like sanding discs on the cut-
off grinder. I think that all I need to polish the edges of the
Silestone scrap is something like a buffing disk with different grits
-- start with maybe 60 grit, go to 180 or 220 or more as the Silestone
is polished.

Anyone out there know how to do this??

Thanks.


Think you answered your own question. Have you googled your question?

--
"You can lead them to LINUX
but you can't make them THINK"
Running Mandriva release 2008.0 free-i586 using KDE on i586
  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 462
Default Polishing silestone


"Kickin' Ass and Takin' Names" wrote in message
...
We are building a new house and have installed Silestone kitchen
countertops. When the installers put the countertops in place, they
used a cut-off grinder with masonry cutting wheel to cut out the holes
in the countertop for the cooktop and the sinks.

They left the scrap pieces of Silestone with me. I want to use these
scraps to make a table top, a board on which to knead dough, and a top
to put outside next to my charcoal grill.

Problem is the edges of the Silestone scraps are rough.

The installers had to cut a couple of my backsplashes and they
polished the cut ends using what looked like sanding discs on the cut-
off grinder. I think that all I need to polish the edges of the
Silestone scrap is something like a buffing disk with different grits
-- start with maybe 60 grit, go to 180 or 220 or more as the Silestone
is polished.

Anyone out there know how to do this??

Thanks.


you have to use much more fine grits. 120, 240, 400, 600, 800, 1500, 3000,
and final buffs are used. you can get them in places that sell to granite
polishers. for example,

http://tinyurl.com/594ey7

regards,
charlie
http://glassartists.org/ChaniArts



  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1
Default Polishing silestone

responding to
http://www.homeownershub.com/mainten...ne-307402-.htm
Andrey wrote:

charlie wrote:

"Kickin' Ass and Takin' Names"
wrote in message
...
We are building a new house and have installed Silestone kitchen
countertops. When the installers put the countertops in place,
they
used a cut-off grinder with masonry cutting wheel to cut out the
holes
in the countertop for the cooktop and the sinks.

They left the scrap pieces of Silestone with me. I want to use
these
scraps to make a table top, a board on which to knead dough, and a
top
to put outside next to my charcoal grill.

Problem is the edges of the Silestone scraps are rough.

The installers had to cut a couple of my backsplashes and they
polished the cut ends using what looked like sanding discs on the
cut-
off grinder. I think that all I need to polish the edges of the
Silestone scrap is something like a buffing disk with different
grits
-- start with maybe 60 grit, go to 180 or 220 or more as the
Silestone
is polished.

Anyone out there know how to do this??

Thanks.


you have to use much more fine grits. 120, 240, 400, 600, 800, 1500,
3000,
and final buffs are used. you can get them in places that sell to
granite
polishers. for example,


http://tinyurl.com/594ey7


regards,
charlie
http://glassartists.org/ChaniArts


There are many advantages when you use Silestone: the surface, that is
made from natural quartz, is very resistant to stains and scratches, and
tends to fluid intake.

Source:

http://www.naturstein-profi.com/






-------------------------------------




Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
granite vs. silestone which one should I get? [email protected] Home Ownership 4 December 17th 06 04:58 AM
silestone bar keglidd Home Repair 2 December 13th 06 06:45 PM
Mounting a silestone vanity top BIOSMonkey Home Ownership 1 June 4th 06 12:56 AM
Silestone repair David Home Repair 2 April 21st 06 10:59 PM
Attach silestone? Chas12 Woodworking 14 February 4th 06 05:04 PM


All times are GMT +1. The time now is 03:01 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"