Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 4
Default Engineered vs. Plywood for Kichen cabinets

In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 833
Default Engineered vs. Plywood for Kichen cabinets

Yamuk wrote:
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.


If, by "engineered wood", you mean ,melamine covered particle board
then that would be my choice. Plywood is a better product but it
needs some sort of finish. And regardless of what it might be
finished with, that finish is not nearly as durable or easy to clean
as is the melamine on the particle board.

Yes, if particle board gets wet it will expand; solution is to not get
it wet...not hard to do. However, do NOT use particle board on the
top...it *will* get wet there.

For backs, one can use tileboard too...cheap and readily available. I
prefer to use 1/4" mel board but it is sometimes hard to come by; if
so, I use 1/2" mel board.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico



  #3   Report Post  
Posted to alt.home.repair
Joe Joe is offline
external usenet poster
 
Posts: 2,837
Default Engineered vs. Plywood for Kichen cabinets

On Jul 21, 6:52 am, Yamuk wrote:
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.


Check out some of the baltic birch and other nice plywood now in the
market. That way you won't get stuck with wallpapered crumbleboard
where you can see it. Remember, 'engineered' wood (think MDF) always
sags under long term load and chips readily, so shelving isn't the
best use for it. As a $ saving material in the right place it is OK,
but knowing its weaknesses will save you disappointment later. HTH

Joe

  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,575
Default Engineered vs. Plywood for Kichen cabinets

Yamuk wrote:
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.


When the inevitable leak comes, you will be glad that you have plywood.
If particle board gets wet, it bulges more (IMO) and crumbles. We
have bathroom vanities where just the moisture on seam of where two
pieces of formica meet, the particle bd. absorbed a little moisture, it
bulges open a tad, gets more moisture....moisture tends to hang on the
bottoms of the doors, as well, and they have bulged a little. Most
noticeable on backsplash. I also had a countertop of p.b. which wicked a
little moisture from a tight-looking seam and started to bulge.

We had a flood, just months after refacing and getting new doors/drawers
on our very old ply kitchen cabinets. No harm done, but it got cleaned
up quickly.
  #5   Report Post  
Posted to alt.home.repair
Pat Pat is offline
external usenet poster
 
Posts: 88
Default Engineered vs. Plywood for Kichen cabinets


"Yamuk" wrote in message
news
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.


I am getting old. When I build a cupboard now I like to use plywood because
it is light.




  #6   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 5,149
Default Engineered vs. Plywood for Kichen cabinets


"Pat" wrote in message
...

"Yamuk" wrote in message
news
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.


I am getting old. When I build a cupboard now I like to use plywood
because it is light.

Whoever owns the place 20 years from now will be happier with
furniture-grade plywood. By engineered wood, do you mean the hi-density
stuff with real veneer faces (like Norm uses on his show for selected
applications, and stereo geeks used to make speaker cabinets from?), or what
the big-box sales guy calls engineered wood, which is just chipboard with a
faux woodgrain plastic applied to it?
(IMHO, fake woodgrain should be a felony. If you can't afford wood, that is
what Formica is for.)

If it has real veneer, it might be acceptable for end panels and backs. I
wouldn't use it for any horizontal applications, or doors. Just too water
and impact sensitive. (Sags, screws pull out, warps, etc.) Leastways that
has been my experience over several cheap rental kitchens, and lotsa
installation callbacks in an earlier life. I'm currently trying to undo what
previous owner did to the fine 1960 solid wood cabinets in this place
(horrible faux finish paint job, butchered over-stove micro installation.) I
sure can't afford what similar quality replacements would cost today- I'd be
looking in the chipboard aisle.

aem sends...



  #7   Report Post  
Posted to alt.home.repair
Red Red is offline
external usenet poster
 
Posts: 383
Default Engineered vs. Plywood for Kichen cabinets

On Jul 21, 6:52 am, Yamuk wrote:
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.


Stay away from the Chinese plywood thats on the market now - it warps,
has inferior wood, varies in thickness, and has very thin veneer. Be
sure you know where it comes from.

Red

  #8   Report Post  
Posted to alt.home.repair
EXT EXT is offline
external usenet poster
 
Posts: 1,661
Default Engineered vs. Plywood for Kichen cabinets

The problem is that the term "engineered" is applied to ANY wood that is
man-altered, even plywood. So you really need to know what they are pushing
under the label "engineered" because it can cover a whole gamut of different
products. My choice would be cabinet grade hardwood plywood with a veneer of
your favourite finish wood.

"Yamuk" wrote in message
news
In regard to kitchen cabinets, what are feelings in terms of
engineered wood vs. plywood for the end panels, floors/tops, wall
backs, base backs, and shelves?

The proposed cabinets would be getting use only by 2 retired baby
boomers.



  #9   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 430
Default Engineered vs. Plywood for Kichen cabinets

Red wrote:

Stay away from the Chinese plywood thats on the market now - it warps,
has inferior wood, varies in thickness, and has very thin veneer. Be
sure you know where it comes from.


I just picked up a load of Chinese birch ply for some painted cabinets. It's
nice stuff. Look at the material itself, not the source.
-- Doug
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
stain for plywood cabinets Eigenvector Home Repair 13 March 22nd 07 07:20 AM
stain for plywood cabinets Eigenvector Woodworking 8 March 18th 07 03:06 AM
Cabinets in basement...melamine, mdf, plywood? RobW Woodworking 21 October 31st 06 05:55 AM
Oil Based Primer O.K. On Engineered Wood Products Like T1-11 Plywood ? Robert11 Home Repair 2 May 13th 06 03:05 PM
Workshop cabinets out of MDF instead of Plywood? Andy Jeffries Woodworking 12 March 13th 06 07:59 PM


All times are GMT +1. The time now is 03:38 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"