MayTag Dishwasher Control Panel doesnt work
 

We use our dishwasher only about once every 2 weeks.
Yesterday, it refused to work.
The HEAVY CYCLE button would light, but not the NORMAL, LIGHT, or
RINSE buttons.

Pressing the START button and nothing happens.

On the right side the Lock and Dry buttons would light if the heavy
cycle button was lit.

I tried latching and relatching the door, but nothing happened.

any ideas?

I tried opening up the door to inspect the control panel, but after
removing the back panel, I don't know how to get to the control panel

THANKS

MayTag Dishwasher Control Panel doesnt work
 

Japple wrote:
We use our dishwasher only about once every 2 weeks.
Yesterday, it refused to work.
The HEAVY CYCLE button would light, but not the NORMAL, LIGHT, or
RINSE buttons.

Pressing the START button and nothing happens.

On the right side the Lock and Dry buttons would light if the heavy
cycle button was lit.

I tried latching and relatching the door, but nothing happened.

any ideas?

I tried opening up the door to inspect the control panel, but after
removing the back panel, I don't know how to get to the control panel

THANKS

First, see if its listed as a recall item he
https://repair.maytag.com/repair/dis...iteCd=MT_EN_US
--
Grandpa

MayTag Dishwasher Control Panel doesnt work
 

Yeah, I checked, but no, it's not on recall...

MayTag Dishwasher Control Panel doesnt work
 

On 14 Mar 2007 12:17:38 -0700, "Japple"
wrote:

We use our dishwasher only about once every 2 weeks.
Yesterday, it refused to work.
The HEAVY CYCLE button would light, but not the NORMAL, LIGHT, or
RINSE buttons.

Pressing the START button and nothing happens.


Find the breaker, turn it off for 30 seconds and back on; sounds like
your dw crashed.

MayTag Dishwasher Control Panel doesnt work
 

On Mar 16, 5:21 pm, Chris Hill wrote:
On 14 Mar 2007 12:17:38 -0700, "Japple"
wrote:

We use our dishwasher only about once every 2 weeks.
Yesterday, it refused to work.
The HEAVY CYCLE button would light, but not the NORMAL, LIGHT, or
RINSE buttons.

Pressing the START button and nothing happens.

Find the breaker, turn it off for 30 seconds and back on; sounds like
your dw crashed.

You mean a breaker in the DW?/
where?

MayTag Dishwasher Control Panel doesnt work
 

He means the dw breaker in your house circuit breaker box. I doubt it will
help but you might try cutting the circuit for a few minutes and then seeing
if the dw fixes itself. I had a 3 level Maytag DW that did the same thing
after 2 other repairs. We threw it in the trash.


"Japple" wrote in message
ups.com...
On Mar 16, 5:21 pm, Chris Hill wrote:
On 14 Mar 2007 12:17:38 -0700, "Japple"
wrote:

We use our dishwasher only about once every 2 weeks.
Yesterday, it refused to work.
The HEAVY CYCLE button would light, but not the NORMAL, LIGHT, or
RINSE buttons.

Pressing the START button and nothing happens.

Find the breaker, turn it off for 30 seconds and back on; sounds like
your dw crashed.

You mean a breaker in the DW?/
where?

MayTag Dishwasher Control Panel doesnt work
 

Yeah, Tried this, nothing...