2 wire honeywell zone valves
 

i have 2 red wires and 2 yellow wires . Where do i hook them up on the
boiler ?

2 wire honeywell zone valves
 

The two red wires are connected to an end line switch, which closes when the
valve is fully opened. Those two wires close a low voltage circuit to start
the circulator. The two yellow wires are the valve's motor. One of them gets
connected to one leg of your 24 volt transformer, the other one gets
connected to the return wire from its thermostat, the second wire from the
thermostat and the second leg of the transformer get wire nutted together.
Since you have two zone valves, just duplicate the process


"BOILERMAN" wrote in message
news:805af1b4da17a74342480b68326f3852@homerepairli ve.com...
i have 2 red wires and 2 yellow wires . Where do i hook them up on the
boiler ?

2 wire honeywell zone valves
 

BOILERMAN wrote:
i have 2 red wires and 2 yellow wires . Where do i hook them up on the
boiler ?

Wait a minute.....Your name is BOILERMAN and you don't know how to
connect up a zone value? You should call someone who will connect the
valve up correctly.

-paul