Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Old Craftsman Snowblower Square Pin
I recently was given a very old Craftsman 6HP with a 20-21" scoop.
snowblower. It started on one pull and ran perfectly but in testing I found the auger was slipping. On further inspection I can see the chain is badly stretched. I could pull it off easily with just my hands. I proceeded to pull the cover off and when investigating the chain a small rectangular pin about an inch long fell out of the engage/disengage mechanism on the transmission shaft. I'm guessing it is some kind of shearing pin but for the life of me I cannot figure out where this pin goes? |
#2
Posted to alt.home.repair
|
|||
|
|||
Old Craftsman Snowblower Square Pin
|
#3
Posted to alt.home.repair
|
|||
|
|||
Old Craftsman Snowblower Square Pin
The square pin you are refering to is a keyway from the auger drive.
Look on the shaft (coupling) that drives the auger Jack wrote: wrote: I recently was given a very old Craftsman 6HP with a 20-21" scoop. snowblower. It started on one pull and ran perfectly but in testing I found the auger was slipping. On further inspection I can see the chain is badly stretched. I could pull it off easily with just my hands. I proceeded to pull the cover off and when investigating the chain a small rectangular pin about an inch long fell out of the engage/disengage mechanism on the transmission shaft. I'm guessing it is some kind of shearing pin but for the life of me I cannot figure out where this pin goes? Have you gone to SEARS website for a parts list breakdown of it showing all the parts? I went there on a drill I have that was about 30 yrs old and up it came. Also they still had parts. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
cutting square lines w/ bandsaw | Woodworking | |||
spokeshave question (how to drill a square hole) | Woodworking | |||
Are push fit plumbing fittings any good? | UK diy | |||
Opinions/Flamecatcher - Craftsman Power Tools | Woodworking | |||
craftsman lathes FS | Metalworking |