Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
GE dishwasher GSD4030Z02WW drain valve leaking
Leaks around shaft when solenoid is activated. I'm not sure how to remove
the plastic piece (that the solenoid pulls down) from the end of the shaft to get at the seal. It appears the end of the shaft is larger than the hole in the plastic. Afraid to pull it very hard - if I pull the shaft out of the valve then I have more problems, right? Would appreciate any suggestions. Thanks, David |
#2
Posted to alt.home.repair
|
|||
|
|||
GE dishwasher GSD4030Z02WW drain valve leaking
David Linscott wrote: Leaks around shaft when solenoid is activated. I'm not sure how to remove the plastic piece (that the solenoid pulls down) from the end of the shaft to get at the seal. It appears the end of the shaft is larger than the hole in the plastic. Afraid to pull it very hard - if I pull the shaft out of the valve then I have more problems, right? Would appreciate any suggestions. Thanks, David Hi, Leaks around shaft when solenoid is activated Normally the best repair is too replace the motor and pump assy. Have tried a few drain post seals and all came back to haunt us http://www.pcappliancerepair.com/cgi...13&bra nd=GEH if I pull the shaft out of the valve then I have more problems, right? Won't come out. jeff. Appliance Repair Aid http://www.applianceaid.com/ |
#3
Posted to alt.home.repair
|
|||
|
|||
GE dishwasher GSD4030Z02WW drain valve leaking
OK...well, I'm a cheapskate. I found it does pull off with a little more
force. I'm going to try replacing it, then I'll keep an eye on it. I think I'm going to put some kind of a pan under there and build or buy a little alarm to check for water. They ought to offer such a thing for all clothes/dishwashers. This one is on a kitchen floor that is hardwood - that's another thing that should be outlawed! :) Thanks for your response... David "Appliance Repair Aid" wrote in message oups.com... David Linscott wrote: Leaks around shaft when solenoid is activated. I'm not sure how to remove the plastic piece (that the solenoid pulls down) from the end of the shaft to get at the seal. It appears the end of the shaft is larger than the hole in the plastic. Afraid to pull it very hard - if I pull the shaft out of the valve then I have more problems, right? Would appreciate any suggestions. Thanks, David Hi, Leaks around shaft when solenoid is activated Normally the best repair is too replace the motor and pump assy. Have tried a few drain post seals and all came back to haunt us http://www.pcappliancerepair.com/cgi...13&bra nd=GEH if I pull the shaft out of the valve then I have more problems, right? Won't come out. jeff. Appliance Repair Aid http://www.applianceaid.com/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vaillant VCW GB 242E Over pressure valve leaking | UK diy | |||
Help...Dishwasher Won't Drain | Home Repair | |||
Leaking Dishwasher - plugged drain? | Home Repair | |||
Wet around hot water heater drain valve | Home Repair | |||
moving water main valve | Home Repair |