Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 35
Default Unvented heater/ODS info

Can anyone give me some info on ODS pilots?
I need to know what the normal range of voltage the ODS puts out.
Normal thermocouples will hold a magnet in at about 20mv.
Can't get the one I checked to go higher than 10-15mv
Thanks
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 114
Default Unvented heater/ODS info

First off, unvented heaters make people into Darwin award nominees (They
kill people).

"Tom Lachance" wrote in message
...
Can anyone give me some info on ODS pilots?
I need to know what the normal range of voltage the ODS puts out.
Normal thermocouples will hold a magnet in at about 20mv.
Can't get the one I checked to go higher than 10-15mv
Thanks


The t-couple on a ODS equipped heater is a standard one. The difference is
the orifice that leads to the actual pilot. The orifice actually is a
specific size that a certain amount of oxygen goes through to keep the pilot
burning. If the oxygen content drops too low, the pilot 'impinges' on the
t-couple less, effectively killing the power generation.


  #3   Report Post  
Posted to alt.home.repair
 
Posts: n/a
Default Unvented heater/ODS info

In article ,
HeatMan wrote:
First off, unvented heaters make people into Darwin award nominees (They
kill people).


What kills more people, freezing to death/exposure, or unvented gas
heaters?



--
No dumb questions, just dumb answers.

Larry Wasserman - Baltimore, Maryland -
  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 94
Default Unvented heater/ODS info

On Tue, 10 Oct 2006 22:08:15 -0400, "HeatMan"
wrote:

First off, unvented heaters make people into Darwin award nominees (They
kill people).


Why do you say that?

Here in Connecticut there are thousands of unvented heaters in use.
They all have oxygen depletion shutdown systems and other safeties
that are reliable. They have UL and American Gas Association safety
ratings. The codes only prevent them from being used in enclosed
bedrooms, probably worrying about oxygen depletion.
The O2 sensors in ones that I've seen shut down the heater if the O2
is reduced from the nominal 22% in air to 19%.

Unvented gas fireplaces are also increasingly common.

Consumer reports did an analysis of them. The CO emissions were
miniscule. They did wonder a bit about the amount of water vapor
emitted into the air - possibly a problem for mold growth under
certain circumstances. Yet the addition of moisture in the air is
generally a good thing during winter.

I've not heard of a single death from one of these units.

I have heard of deaths from malfunctioning standard vented gas
furnaces, boilers and heaters.

Doug
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Thompson 2F Grinder Info Don Young Metalworking 2 March 30th 05 06:32 AM
Any info on a Martin lathe? (German) Greg Deputy Metalworking 5 February 26th 05 07:40 PM
plain info on planes - ISO igor Woodworking 18 February 10th 05 06:20 PM
Narex Model CAT40-32-16OU info help JohnF Metalworking 3 July 22nd 03 07:44 PM


All times are GMT +1. The time now is 10:39 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"