Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Cutting a vinyl fence
What's the best method/tool to cut a vinyl fence? Thanks...
|
#2
Posted to alt.home.repair
|
|||
|
|||
Cutting a vinyl fence
davex1001 wrote:
What's the best method/tool to cut a vinyl fence? Thanks... Any woodworking tools. The 'best' depends on the type of cut. Finer tooth blade is better but combination blades should be fine too. Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php |
#3
Posted to alt.home.repair
|
|||
|
|||
Cutting a vinyl fence
If installing, use a jigsaw. If removing, use a sawzall.
No wrote: davex1001 wrote: What's the best method/tool to cut a vinyl fence? Thanks... Any woodworking tools. The 'best' depends on the type of cut. Finer tooth blade is better but combination blades should be fine too. Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php |
#4
Posted to alt.home.repair
|
|||
|
|||
Cutting a vinyl fence
What kind of blade?
IBM5081 wrote: If installing, use a jigsaw. If removing, use a sawzall. No wrote: davex1001 wrote: What's the best method/tool to cut a vinyl fence? Thanks... Any woodworking tools. The 'best' depends on the type of cut. Finer tooth blade is better but combination blades should be fine too. Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php |
#5
Posted to alt.home.repair
|
|||
|
|||
Cutting a vinyl fence
Vinyl fence (you can do vinyl siding this way too)
If you have a miter saw, take the blade and reverse it. It doesnt matter if you have a rough or fine blade because using the blade backwards then makes it cut the plastic by grinding it away. Nice clean cuts and no missing chunks of plastic. Tom davex1001 wrote: What's the best method/tool to cut a vinyl fence? Thanks... |
#6
Posted to alt.home.repair
|
|||
|
|||
Cutting a vinyl fence
davex1001 wrote:
What kind of blade? IBM5081 wrote: If installing, use a jigsaw. If removing, use a sawzall. No wrote: davex1001 wrote: What's the best method/tool to cut a vinyl fence? Thanks... Any woodworking tools. The 'best' depends on the type of cut. Finer tooth blade is better but combination blades should be fine too. Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php Fine tooth woodcutting blade for install. For removal any rough cut blade will do. You asked about recip saws in another post. Milwaukee "The Axe" would be a good choice for fast demolition. Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vinyl siding to replace wood siding. | Home Repair | |||
Need help with the Excalibur sliding table. | Woodworking | |||
Incra 1000 SE crosscut fence | Woodworking | |||
Ping - Leon (Trials and Tribulations of Finding an Accurate Fence) | Woodworking | |||
Fence Novice Question | Home Repair |