Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
basement sink install
I'm considering having a utility sink and an old dishwasher hooked up
in my basement. The plan would be to use an above ground sump and pump to move the water up 4-5 ft to my main sewage line. A contractor tells me a special pump is required to handle the heat of dishwasher water. Here are my questions: 1.) Is this true? 2.) What temperature should the pump be rated for? The model he is considering is a WaterAce R930 which is rated for 140 degrees F 3.) Is this something that a licenced plumber needs to do? Thanks, RD |
#2
|
|||
|
|||
"RD" wrote in message oups.com... I'm considering having a utility sink and an old dishwasher hooked up in my basement. The plan would be to use an above ground sump and pump to move the water up 4-5 ft to my main sewage line. A contractor tells me a special pump is required to handle the heat of dishwasher water. Here are my questions: 1.) Is this true? === Almost surely true. Also the pump has to be able to stand the effects of the detergents and things like that. 2.) What temperature should the pump be rated for? The model he is considering is a WaterAce R930 which is rated for 140 degrees F === I believe 140 is the recommended temp for dishwashers. At any rate, it should be rated at least equal to or higher than that with an intermittant duty cycle 3.) Is this something that a licenced plumber needs to do? Sounds like it. I only say that because of the questions you've asked and the manner in which you asked them. I simply meant it sounds like you don't have access to the accurate information you really need, and probably not the experience you need. Therefore IMO you should see a plumber. However, it's well within the abilities of a diy'er if you can figure what you need and how to apply it. There might be local codes requiring it to be done by a licensed plumber also; check with your code enforcement office to find out. HTH, Pop Thanks, RD |
#3
|
|||
|
|||
"RD" wrote in message The plan would be to use an above ground sump and pump to move the water up 4-5 ft to my main sewage line. Yes, things like this are done all the time. You may alsowant to look under "ejector" A contractor tells me a special pump is required to handle the heat of dishwasher water. Here are my questions: 1.) Is this true? All pumps will have a temperature rating. If there is a sump of some sort, the temperature will be moderated by the water already in the sump. 2.) What temperature should the pump be rated for? The model he is considering is a WaterAce R930 which is rated for 140 degrees F That should do it. We use 140 degree pumps at work for cooling water that i 130 to 150 and they last for years. 3.) Is this something that a licenced plumber needs to do? The town probably requires a permit for plumbing. Many people don't bother. It can be done by someone with a little experience. The system should have a check valve on the outlet to prevent backflow. There should be an alarm on the sump if the water reaches a certain level and the pump fails. Lok at some of the commercial products available www.mcmaster.com or www.grainger.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SUMP PUMP alternative | Home Repair | |||
basement humidity (do I need dehumidifier and, if so, would this setup work well) | Home Repair | |||
What kind of light fixture is quickest to install on open basement ceiling? | Home Repair | |||
kitchen sink problem: want single-flow crosstop deck sink mixer... but height clearance limited | UK diy | |||
Kitchen Double Sink Suds Problem | Home Repair |