Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
john
 
Posts: n/a
Default Pool solar panel repair

I have a rubber solar panel system to heat my swimming pool.

A few of the small rubber tubes have cracked and are leaking.
Anyone out there know how to go about repairing them?
I did a google search and found only one instance which described this
problem and the possible fix (using flexible tubing - not detailed on
the repair procedure). I would prefer to use an adhesive if there were
one that could withstand the heat being generated by direct sunlight
and the chemicals in the water passing through the repair joint.

TIA to all who reply.

John

  #2   Report Post  
Travis Jordan
 
Posts: n/a
Default

john wrote:
I would prefer to use an adhesive if there
were one that could withstand the heat being generated by direct
sunlight and the chemicals in the water passing through the repair
joint.


And the expansion and contraction of the joint because of temperature
cycling.

Unless you can find some kind of solvent repair I think you'll end up
having to replace the tubing.


  #3   Report Post  
PipeDown
 
Posts: n/a
Default

Silicone RTV sealant will satisfy the waterproof, temperature, and
flexibility and with the right brand will not be effected by sunlight (see
label) but if your system is pressurized it might not be strong enough to
resist leaks.

Perhaps you can insrt a rigid tube (metal, glass, plastic) inside the rubber
tube and clamp onto that surface. If tight enough, no sealant would be
needed.


"john" wrote in message
oups.com...
I have a rubber solar panel system to heat my swimming pool.

A few of the small rubber tubes have cracked and are leaking.
Anyone out there know how to go about repairing them?
I did a google search and found only one instance which described this
problem and the possible fix (using flexible tubing - not detailed on
the repair procedure). I would prefer to use an adhesive if there were
one that could withstand the heat being generated by direct sunlight
and the chemicals in the water passing through the repair joint.

TIA to all who reply.

John



  #4   Report Post  
John Keiser
 
Posts: n/a
Default

The pool is a demanding environment.

Sun, heat, chemicals.

Consider if "a few" have cracked, the rest will likely follow.


--
Remove -NOSPAM- to contact me.


  #5   Report Post  
john
 
Posts: n/a
Default

Thanks for the suggestion. The RTV sealant sounds like it might work,
even though there is low pressure in the pipes originating at the pump.


The rigid tube is not an option, since clamping is impossible on a
small quarter inch tube attached to flat substrate.

John



  #6   Report Post  
john
 
Posts: n/a
Default

Considering the service years of the system, you may be right. I'll try
repairing the few that are leaking (only one of the panels is affected)
and see what happens.

John

  #7   Report Post  
Dave
 
Posts: n/a
Default

FWIW - My Solaroll system is 24 years old and has had only 2 leaks in all
those years. Of course, they've gone out of business, LOL!

Dave


wrote in message
...
On 7 Jun 2005 19:22:40 -0700, "john" wrote:

Considering the service years of the system, you may be right. I'll try
repairing the few that are leaking (only one of the panels is affected)
and see what happens.

John


How old are they ?
Is this storm damage (snow, hurricane etc) or just sun?



  #8   Report Post  
john
 
Posts: n/a
Default

They are 12 years old. This is the first season I've had leaks.
I suppose the leaks sprung because of exposure to the elements over the
years (I'm located in the northeast).

John

wrote:


How old are they ?
Is this storm damage (snow, hurricane etc) or just sun?


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT - Global Warming (Was "Lying Liberals.") wmbjk Metalworking 6 June 17th 05 09:11 AM
Removing panel from PVC-U door Peter Saffrey UK diy 6 March 22nd 05 04:34 PM
Copper vs. aluminum electrical supply Jeffrey J. Kosowsky Home Repair 21 November 5th 04 02:45 AM
Swimming pool - fiberglass repair Kali Home Ownership 0 July 20th 03 04:28 AM
New Pool Horror Story Monica Butler Home Repair 3 July 3rd 03 06:42 AM


All times are GMT +1. The time now is 02:04 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"