I am finishing a remodel and set up for tile. Had vinyl shower pans
installed in both showers several months ago. They held water, passed
inspection and so I cut out the drains to let the water out. So much has
happened since with workers walking over everything that I decided that I
wanted to retest. Used a drain plug in one drain without a problem but the
other shower drain is old and the threads on the inside are rusted off so I
cannot screw a nipple down into it. I tried using a drain plug but because
of the uneveness of the surface water still finds it way down the drain. I
am at a loss. I don't really want to crack up the slab, change out the
drain and have to put in another shower pan, etc. The trap is full of water
which implies to me that the drain is holding water. A guy I know came over
and pumped the line with balloons and said that that the pan was OK but the
drain seems to be seeping but if so the trap would be dry. What can I use
to plug that drain and check the pan other than the conventional
expandable drain plug. Are some drain plugs better than others? How do I
install the drain plug, maybe I am doing it wrong. And lastly, is rust on
the inside of the collar where the drain and sub drain connect with deep
crevaces a problem. Redoing this drain and shower pan would be $$$$$. Help
if you can. Thanks.