Home Ownership (misc.consumers.house)

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 1
Default a/c & furnace replacement

I am contemplating replacing the air conditioning unit on my
manufactured home rental. I am getting mixed signals as to what I can
use vs. what I need. The house is a super-single at 16x72 and I have
been told that you cannot use a standard air conditioning unit on a
manufactured home. It must be a unit designed for a manufactured
home. Something to do with the size of the air ducting.

The current unit is a 3-ton unit which I am told should be sufficient
for a 1200sf home. However, this unit runs constantly in the hot
Arizona summers and will not cool the house to less than 83 degrees.
The renter usually winds up with an electric bill of about $300/mo. I
have had two different a/c companies look at the unit and am told the
refrigerant levels are at acceptable levels and the unit is operating
properly.

I would like to upgrade to a 3.5 or 4-ton heat pack unit but I've been
told that is too much unit for the house by some and that it is ok by
others. I am also considering putting in a heat pack unit to move the
noisy "trailer house" furnace outside. Bids for this have come in at
around $5400. This is more money than I want to spend but I have an
excellant renters and don't want to loose them.

What are your thoughts.
  #3   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 54
Default a/c & furnace replacement

In article
,
wrote:

I am contemplating replacing the air conditioning unit on my
manufactured home rental. I am getting mixed signals as to what I can
use vs. what I need. The house is a super-single at 16x72 and I have
been told that you cannot use a standard air conditioning unit on a
manufactured home. It must be a unit designed for a manufactured
home. Something to do with the size of the air ducting.

The current unit is a 3-ton unit which I am told should be sufficient
for a 1200sf home. However, this unit runs constantly in the hot
Arizona summers and will not cool the house to less than 83 degrees.
The renter usually winds up with an electric bill of about $300/mo. I
have had two different a/c companies look at the unit and am told the
refrigerant levels are at acceptable levels and the unit is operating
properly.

I would like to upgrade to a 3.5 or 4-ton heat pack unit but I've been
told that is too much unit for the house by some and that it is ok by
others. I am also considering putting in a heat pack unit to move the
noisy "trailer house" furnace outside. Bids for this have come in at
around $5400. This is more money than I want to spend but I have an
excellant renters and don't want to loose them.

What are your thoughts.


For the A/C unit, if its otherwise working well, maybe you can do things
to help it run more efficiently such as shield it from exposure to the
sun and put in window tinting in the home and perhaps improve on the
home's insulation.

For the furnace, can't you put some sound baffles around it to reduce
the noise, or is there not enough space to do that?
  #4   Report Post  
Posted to misc.consumers.house
external usenet poster
 
Posts: 4,926
Default a/c & furnace replacement

On Jan 18, 5:10*am, Shawn Hirn wrote:
In article
,





wrote:
I am contemplating replacing the air conditioning unit on my
manufactured home rental. *I am getting mixed signals as to what I can
use vs. what I need. *The house is a super-single at 16x72 and I have
been told that you cannot use a standard air conditioning unit on a
manufactured home. *It must be a unit designed for a manufactured
home. *Something to do with the size of the air ducting.


The current unit is a 3-ton unit which I am told should be sufficient
for a 1200sf home. *However, this unit runs constantly in the hot
Arizona summers and will not cool the house to less than 83 degrees.
The renter usually winds up with an electric bill of about $300/mo. *I
have had two different a/c companies look at the unit and am told the
refrigerant levels are at acceptable levels and the unit is operating
properly.


I would like to upgrade to a 3.5 or 4-ton heat pack unit but I've been
told that is too much unit for the house by some and that it is ok by
others. *I am also considering putting in a heat pack unit to move the
noisy "trailer house" furnace outside. *Bids for this have come in at
around $5400. *This is more money than I want to spend but I have an
excellant renters and don't want to loose them.


What are your thoughts.


For the A/C unit, if its otherwise working well, maybe you can do things
to help it run more efficiently such as shield it from exposure to the
sun and put in window tinting in the home and perhaps improve on the
home's insulation.

For the furnace, can't you put some sound baffles around it to reduce
the noise, or is there not enough space to do that?- Hide quoted text -

- Show quoted text -


Foam insulation on the roof and underneath would be cheaper and cure
your issues
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas furnace replacement Paul Isaacs Home Repair 26 March 21st 06 01:23 AM
Furnace Replacement question [email protected] Home Repair 7 December 22nd 05 01:15 AM
Furnace Replacement question m Ransley Home Repair 1 December 21st 05 11:10 PM
Furnace and AC replacement Gilbert Baron Home Repair 16 June 9th 05 03:34 PM
Furnace/AC replacement questions-- Rotation Slim Home Repair 4 October 3rd 04 10:07 PM


All times are GMT +1. The time now is 11:07 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"