NOTE

It is suggested that the technician reads all the way through and understand
the following procedure for entering/exiting the service adjustment mode;
then proceed with the instructions working with the receiver. When becoming
familiarwith the procedure, the flow chart for service mode may be used as a
quick guide.

Quick entry to service mode

When minor adjustments need to be done to the electronic controls, the
method of entering the service mode without removal of the cabinet back is
as follows using the remote control:


1.. Select SET-UP icon and select CABLE mode.

2.. Select TIMER icon and set SLEEP time for 30 Min.

3.. Press "ACTION" twice to exit menus.

4.. Tune to the channel 124.

5.. Adjust VOLUME to minimum (0).

6.. Press VOL ? (decrease) on receiver. Red "CHK" appears in upper corner.

To toggle between aging and service modes:

While the "CHK" is displayed on the left top corner of the CRT, pressing
"ACTION" and "VOL" UP on the TV simultaneously will toggle between the
modes. Red "CHK" for serviceand yellow "CHK" for aging.

7.. Press POWER on the remote control to display the service adjustment
modes menu, select adjustment by pressing the volume right/left buttons and
channel up/down buttons on the remote and ACTION to enter the adjustment.




Exiting the service mode:

This TV goes out from service mode when it is unplugged or turned OFF. To
exit the service mode, turn the TV OFF from or unplug the TV from A.C

"Gersson" wrote in message
om...
If anyone has it, it would really help!
Thanks
Gersson