Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
REQ: BOSS tu-12 tuner PCB info
I have a BOSS TU-12 tuner with broken PCB traces around the surface-mount
chip. I've accounted for all pins except for one. With the lower casing removed and the PCB aligned so that the writing on the chip (and PCB) is directly readable, the pin I need to know about is the 3rd pin from the top on the East edge of the chip. Is it connected to the top 2 pins (that connect to the negative side of C7) or is it connected to the pin immediately below (that goes to the bottom of R21)? If anybody has a scan of the PCB or is willing to ease the lower casing off of their TU-12 and take a look, I'd be grateful. Thanks, Elmo' 7#9 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha R8 Receiver Tuner Problem | Electronics Repair | |||
FA: The Complete Metalsmith Illustrated Handbook SC 1991 | Metalworking | |||
Squarish Boss for immersion element | UK diy | |||
Toshiba CF35F40 tuner replacement | Electronics Repair | |||
Zenith TV A25A11D and Tuner 175-02721 Replacement Problem | Electronics Repair |