Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Frank
 
Posts: n/a
Default Weller AG 700 hot air station questions

Hi all,

if this is not the correct group for this type of questions, please be
gentle
and point me in the right direction.

I have just won an eBay auction for a Weller AG 700 hot air soldering
station.
It isn't as described in the auction, apart from that it is incomplete, and
moreover I think it
might be defective. Could anybody perhaps help me with the following
questions?

1) I am looking for a user manual for this station. Or maybe someone can
answer
this question off the top of his head. With all the Weller stations I have
used in my
life, the LED that signalizes the correct temperature either blinked
regularely while
the station was heating up and was permanently on when the correct
temperature
was reached. Some, I think, did it vice versa, i. e. permanently on when the
station
was heating up and blinking regularely when the temperature was reached.

The station I've bought does nothing of this. It flickers quite irregularely
regardless
of how long the station has been powered on. Is this normal with this type
of station?

2) The hot air pencil that came with this station seems to be incomplete. I
can't
describe it the way I'd like to since I am not a native speaker, but I will
try.

The tubular thingie with the round hole at the tip is loose. I can simply
pull it
off, in which case I can see the heating element. Said tubular thingie has a
couple
of tiny holes at the end where the plastic handle begins. Most of the hot
air
passes through these holes, so what makes it to the tip isn't sufficient to
even melt
tin in the 500 degrees setting.

There is a thread at the plastic handle end, so I think there must be a part
missing that a) fastens the tubular thingie and b) caps the holes so that
all of
the air reaches the tip. Unfortunately, there is no type number on this hot
air
pencil. It is 19cm long, the blue plastic handle is 11.8cm long. Does
anybody
know the type of this pencil or where I can find a closeup image (or, even
better, the part that is probably missing?

A picture of this soldering station can be found here (not the seller I
bought
from): http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=5988886270,
but the pictures aren't good enough to get an idea about the part or parts
that are
missing on mine.

Thank you very much in advance

Frank


  #2   Report Post  
Ray L. Volts
 
Posts: n/a
Default Weller AG 700 hot air station questions


"Frank" wrote in message ...
Hi all,

if this is not the correct group for this type of questions, please be
gentle
and point me in the right direction.

I have just won an eBay auction for a Weller AG 700 hot air soldering
station.
It isn't as described in the auction, apart from that it is incomplete,
and moreover I think it
might be defective. Could anybody perhaps help me with the following
questions?

1) I am looking for a user manual for this station. Or maybe someone can
answer
this question off the top of his head. With all the Weller stations I have
used in my
life, the LED that signalizes the correct temperature either blinked
regularely while
the station was heating up and was permanently on when the correct
temperature
was reached. Some, I think, did it vice versa, i. e. permanently on when
the station
was heating up and blinking regularely when the temperature was reached.

The station I've bought does nothing of this. It flickers quite
irregularely regardless
of how long the station has been powered on. Is this normal with this type
of station?

2) The hot air pencil that came with this station seems to be incomplete.
I can't
describe it the way I'd like to since I am not a native speaker, but I
will try.

The tubular thingie with the round hole at the tip is loose. I can simply
pull it
off, in which case I can see the heating element. Said tubular thingie has
a couple
of tiny holes at the end where the plastic handle begins. Most of the hot
air
passes through these holes, so what makes it to the tip isn't sufficient
to even melt
tin in the 500 degrees setting.

There is a thread at the plastic handle end, so I think there must be a
part
missing that a) fastens the tubular thingie and b) caps the holes so that
all of
the air reaches the tip. Unfortunately, there is no type number on this
hot air
pencil. It is 19cm long, the blue plastic handle is 11.8cm long. Does
anybody
know the type of this pencil or where I can find a closeup image (or, even
better, the part that is probably missing?

A picture of this soldering station can be found here (not the seller I
bought
from): http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=5988886270,
but the pictures aren't good enough to get an idea about the part or parts
that are
missing on mine.

Thank you very much in advance

Frank


The first 2 hits on google "weller ag700" offer the exploded parts list &
diagram:

http://www.arcade-electronics.com/co...ller_parts.htm

http://www.arcade-electronics.com/we...arpartscat.pdf

Might also try sci.electronics.equipment for the user manual.

Considered sending it back to the seller? If it was misrepresented,
complain to ebay and give the seller a negative feedback!


  #3   Report Post  
gb
 
Posts: n/a
Default Weller AG 700 hot air station questions


"Frank" wrote in message ...
Hi all,

if this is not the correct group for this type of questions, please be
gentle and point me in the right direction.

I have just won an eBay auction for a Weller AG 700 hot air soldering
station.
It isn't as described in the auction, apart from that it is incomplete,
and moreover I think it
might be defective. Could anybody perhaps help me with the following
questions?

1) I am looking for a user manual for this station. Or maybe someone can
answer this question off the top of his head. With all the Weller stations
I have used in my life, the LED that signalizes the correct temperature
either blinked regularely while the station was heating up and was
permanently on when the correct temperature was reached. Some, I think,
did it vice versa, i. e. permanently on when the station
was heating up and blinking regularely when the temperature was reached.

The station I've bought does nothing of this. It flickers quite
irregularely regardless of how long the station has been powered on. Is
this normal with this type of station?


Weller support in Europe
http://www.cooperhandtools.com/europ...t_us/index.htm

The AG700 is an earlier model, the AG 701 is the current model
http://www.cooperhandtools.com/europ...ller/index.htm

gb


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Weller EC2001 Soldering Station Info Jack_son Electronics Repair 3 July 20th 05 07:50 PM
repair Weller EC2001 soldering station Jim Babcock Electronics Repair 2 July 13th 05 06:07 PM
fs: weller fumex fume extractor & pace desoldering station [email protected] Electronics Repair 0 December 6th 04 08:07 PM
Help fixing Weller EC2002A Soldering Station **THE-RFI-EMI-GUY** Electronics Repair 4 September 18th 04 05:35 AM
Repair Weller Solder Station David Shalita Electronics Repair 1 September 1st 03 11:52 PM


All times are GMT +1. The time now is 05:00 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"