Railroad Track Anvil, Built
Now THATS a good idea!
Richard J Kinch wrote:
Shawn writes:
This anvil is
fairly heavy but VERY easy to scoot around the floor as most of the
weight is at the bottom.
Having made similar things, I figured out next time I would use some 1/2"
PVC pipe to cast in an axle through-hole near the bottom of the base. That
way you can put an axle and some wheels just off the ground, and some
sockets for a handle, and you can wheel it around the shop. I imagine you
could retrofit this by welding onto your angles.
|