View Single Post
  #8   Report Post  
Richard J Kinch
 
Posts: n/a
Default Railroad Track Anvil, Built

Shawn writes:

This anvil is
fairly heavy but VERY easy to scoot around the floor as most of the
weight is at the bottom.


Having made similar things, I figured out next time I would use some 1/2"
PVC pipe to cast in an axle through-hole near the bottom of the base. That
way you can put an axle and some wheels just off the ground, and some
sockets for a handle, and you can wheel it around the shop. I imagine you
could retrofit this by welding onto your angles.