View Single Post
  #5   Report Post  
Posted to alt.home.repair
metspitzer metspitzer is offline
external usenet poster
 
Posts: 1,341
Default gutter with low spot in middle and standing water

On Wed, 16 Mar 2011 16:54:06 -0700 (PDT), Kyle
wrote:

Now that the weather has gotten a bit more civilized in my area of the
U.S., I went on the roof to do a few seasonal fixes, among which was
tightening the pins/spikes that hold the gutter in place.

I noticed that the gutter on the front of the house (about 50'/15m
long) has standing water in the center 20'/5m or so (about 3/4"/1cm at
deepest point). Anyone have any reasonable solutions as to how to
raise the center so that water drains and doesn't lay there?

I've seen in old discussions here advice about pulling the gutter and
remounting it, but I don't see how that's feasible. We're talking
about moving a gutter less than the diameter of the nail/pin that
holds it in place, and it's not like one can just move the nail/pin to
the left or right, yes?

Putting the downspout at the low point is right out, as the low spot
is right over the front door.

I haven't seen anyone post results of filling the low space with some
sort of lightweight solid that would raise the "floor" of the gutter
to make it drain.

Any thoughts?


I can hear a loud drip in my gutters when it rains. I was reading
ways to soften the sound. One suggestion is to put a rope in the
drain to give the water a path to drop. It might work as a wick for
your problem.