"Dillon wrote in
:

Removing tap shrouds and the type you have there is easier if you
do not grip close to the base where the threads are as this pinches
them and the shroud will not move.

A pair of grips (water pump pliers) is best for the job.

Pour boiling water over the base where the threads are put, some tissue
or J cloth etc. over the end of the shroud closest to the spindle
and grip as tight as possible with the grips and turn whithout
slipping.

This will more often than not do the trick.

Remember, keep the grips away from the threaded end.

--- news://freenews.netfront.net/ - complaints: ---