View Single Post
  #4   Report Post  
Posted to uk.d-i-y
David WE Roberts[_2_] David WE Roberts[_2_] is offline
external usenet poster
 
Posts: 387
Default Sealing a corrugated iron roof


"Matty F" wrote in message
...
Perhaps those in the UK don't use or know much about corrugated iron
(=steel) roofing. It's widely used here in NZ. It's very strong and
and cheap and holds the house together in an earthquake or hurricane.
You can walk all over it without falling through.

However, I have a professionally installed corrugated iron roof. The
installers don't seem to bother blocking off the holes under the lower
edge, so the wind can whistle through, and rats and mice can get in.
They do use building paper, but that's no problem for the rats.

What are they supposed to do instead to block the gaps?
I'm about to push chicken wire into the gaps and use expanding foam.


We do have the occasional bit of corrugated iron around here - I've just put
a tin roof on my shed (plastic covered and a different profile) and
corrugated iron is widely used in agricultural buildings.
As is asbestos sheeting, but that's another story.

I would normally expect some ventilation under the roof - assuming that
there is insulation and a ceiling beneath - otherwise you get condensation.
However I would also expect it to be bird and insect proof.

Chicken wire and foam sounds as though it would work.

HTH

Dave R