On Oct 9, 9:50 am, "William Andersen" wrote:
thanks
"Roger amd Missy Behnke" wrote in ...



If you want to use shellac try Zinsser BIN. Its a shellac based sealer
that will give it a bright white finish.

"Charlie Self" wrote in message
roups.com...
On Oct 8, 11:43 am, "William Andersen" wrote:
Any ideas on how to paint celotex?
The shop I've inherited (on the corner of our lot) was finished with
celotex. I've tried painting it, but it is really absorbent. Also, where
there had been water leaks from the ceiling, the celotex is discolored,
and
paint doesn't cover the stains.
My intent is to paint it white to brighten up the shop. I've been using
a
brush and roller, and I'm considering spraying paint in the future.

Shellac. Give it a good coat of shellac. You can then paint over the
shellac and the stains won't bleed, or at least not as badly.- Hide quoted text -

- Show quoted text -

Bullseye shellac by Zinnser will do it. Available in big box builder
supply stores for about 12-15 bucks a gal. I have used it numerous
times to paint and seal andcover stains on ceiling tiles which are
typical of celotex type material without the asphalt added. Celotex
was an original material put out by Johns-Manville and was made from
processed corn stalks and leaves, and used for insulated sheathing on
homes etc. Usually sold in 1/2 x 4 x 8 sheets but they also offered a
25/32 or 1" thickness in tongue and groove sheets of 24" x 96" as
well.......