On 19 Jun, 23:01, Andy Hall wrote:
On 2007-06-19 22:45:10 +0100, "AT" said:
"Andy Hall" wrote in message
...
Does anybody know where one can obtain steel reinforcing bar as used for
concrete (ridged) in 16 or 20mm diameter? I believe these are standard
sizes.
I only need a relatively small quantity - about 4x 2m lengths or
equivalent
thanks
.andy
Your first port of call should be a steel stockholders, look in your Yellow
Pages. Ask them for any offcuts. A steel stockholder should also be able to
cut and bend them to your spec, if required. They're usually flexible on
price so look exasperated when given the first price.
Yes I've found a few of those. Steel Fabricators turned up a few as well.
Are you sure you need 16mm or 20mm bars? They also come in 6mm, 8mm, 10mm
and 12mm dia. Larger diameters are also available.
Probably 16mm will be the right choice for what I want.
Thanks for the pointers.- Hide quoted text -
- Show quoted text -
Try this link, you may need to change your town if wrexham is not
where you live.
http://www.yell.com/ucs/UcsSearchAct... h=SEARCH&M=0
Rick