On Sun, 17 Dec 2006 18:26:03 -0500, B A R R Y
wrote:
On Sun, 17 Dec 2006 17:37:15 GMT, "Max"
wrote:
I searched Google for some info on dust collection for my saw. Not much
luck.
Anyone know of a better set up than the factory small port?
I have the metal Delta fitting that attaches below the table. I
bought it years ago at Coastal Tool. My particular fitting accepts a
5" dust hose. It's not perfect, but it's better than anything else
I've seen. It was ~$20 US, as I recall.
http://www.amazon.com/Delta-50-239-D.../dp/B00004Z048
Ridiculous price.
What I'm currently using is just the shop vac with tapered nozzle
hanging from a string tied to the table pin. If you can get the
sawdust right below the table before it gets to the lower blade guides
then you'll get most of it. I intend to make a better fitting
attachment in the future, but the tapered nozzle is working pretty
well for the short term.
-Leuf