David Linscott wrote:
Leaks around shaft when solenoid is activated. I'm not sure how to remove
the plastic piece (that the solenoid pulls down) from the end of the shaft
to get at the seal. It appears the end of the shaft is larger than the hole
in the plastic. Afraid to pull it very hard - if I pull the shaft out of
the valve then I have more problems, right? Would appreciate any
suggestions.
Thanks,
David
Hi,
Leaks around shaft when solenoid is activated
Normally the best repair is too replace the motor and pump assy. Have
tried a few drain post seals and all came back to haunt us
http://www.pcappliancerepair.com/cgi...13&bra nd=GEH
if I pull the shaft out of
the valve then I have more problems, right?
Won't come out.
jeff.
Appliance Repair Aid
http://www.applianceaid.com/