DIYbanter - View Single Post - re-attach ceramic towel rod

wrote:
I'm not sure what adhesive to use. I have ceramic towel bar, both
holders had come loose. It's the type where small squares about 2 in
by 2 in were cut in to the tile (one for each rod holder) and then the
lip of the holders were recessed into the holes. I have cleaned out
each of the holes, and the drywall behind looks dry and in good shape.
What product do I use to re-attach the holders, and how's the best
way to support it while it's drying / curing? Thanks in advance,
Steve

It was probably installed with thinset mortar originally. I'm not sure
you can buy very small quantities though. If you can get latex additive
to mix it with to add strength (Don't mix with water).

But - In your case - I would check in the caulk isle. Look to see if
liquid nails has a product for tile. It would be fast and easy. I'm
pretty sure they do. You can use some duct tape to hold it in place
while the glue dries. Make sure all surfaces are clean and free of old
adhesive first. You will also need to re-grout. You could also use caulk
if you could find a good color match.

Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php