"Tiny Tim" wrote in message
...
I'm about to fit the end trims to my laminated worktops in the
kitchen. I have been supplied with laminated strips to be ironed onto
a PVA coating on the end of the worktops. But the trims are several mm
wider/thicker than the 38mm thickness of the worktops.

Trimming the length and shaping the rolled edge is easy enough but
what is the best way to trim the surplus width? Should I leave a small
edge proud to act as a drip edge below the end of the worktop - the
end of the worktop projects about 2cm beyond the cupboard - or should
I trim it to be flush all round?

Should I fit it and then trim or trim and then fit? Scissors cut
through it easily enough but won't be an option once I've fixed it in
place so what is the best tool to cut/shape and reduce thickness
before or after fixing?

If you trim and then fit it won't be exact. I fitted mine and then filed it
to the exact size. If you leave a drip edge, there is always the chance it
will get caught and come off some time in the future.